Parts & Accessories

Our Rim Strips provide the ultimate in protection between the rim and tube for all types of bicycle setups. - Nylon for maximum strength and effectiveness. - Conforms to rim profile.

You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.

- 2-ply rubber shield fits between tire and tube to prevent flats

The Problem Solvers Presta Valve Extenders add 30 to 70mm of length to your tube or tire valve so that it protrudes far enough out of deep-section rims so that you can attach your pump. These lightweight, durable aluminum extenders are for use with Presta valves that have removable cores. The proper tool for removing the cores and installing the extenders is included.

A new standard in tubeless sealant. Finish Line Tubeless Tire Sealant, featuring Fiberlink technology, will not cure inside the tires and doesn’t need to be refreshed every few months to maintain effectiveness. This sealant will last the entire usable life of the tire. Since there is no liquid latex or ammonia in Finish Line sealant, it is naturally non-toxic, hypoallergenic and safe for carbon fiber rims. Additionally, Finish Line Tubeless Tire Sealant cleans up easily with water – no more scrubbing or scraping cured latex from tires and rims. Fiberlink technology makes this possible. Utilizing DuPont Kevlar fibers, Fiberlink seals are extremely robust once they plug a hole. When a puncture happens, fibers rush into the wound and quickly stop air loss. As the tire flexes while it is ridden, the Fiberlink mesh tightens and reinforces itself, creating a confidence-inspiring seal that will last ride-after-ride. - Non-latex ammonia-free formulation - Kevlar reinforced Fiberlink mesh seal - Seals up to 1/4" punctures - Can be used in extreme temperatures, down to -10 degrees Fahrenheit

A good pair of valves can make a big difference in the reliability and ease-of-use for any tubeless setup. Whisky's No. 7 Brass tubeless valves help ensure your tires are dialed for every ride. And, it's always a good call to keep an extra valve in a pocket or bag. - For use with Whisky tubeless rims and most others - 40mm length - Fits up to a 8mm valve hole - Removable valve core - Sold as a pair

Zipp's Valve Extension extends your threaded Presta valve to accommodate deep dish rims. Use these extenders with your favorite Zipp wheels to make short work of pumping up your tires.

CushCore is an engineered foam insert to be mounted inside a tire, designed to absorb impacts, reduce vibration, and increase lateral stability. These characteristics translate to a more controlled, comfortable, and faster ride. - The system is designed to be used with tubeless-ready or tubeless converted rims and tires and is compatible with tubeless tire sealants - A specially designed tubeless air valve is included with each insert; allowing air to move through the valve without becoming obstructed by the insert - The insert divides the inner volume of the tire in half, maintaining air underneath the tread and the foam insert next to the rim - Fits tire widths 2.1 – 2.6" and rims with internal width 22 – 35mm Includes: - 2 CushCore Inserts - 2 CushCore Tubeless Air Valves - 4 Rim Stickers - Installation Instructions

- Shim adds support to presta stem used in a schrader rim

The Next Level in Sealing Power from the People who Invented Tubeless Conversions If you've walked the mechanics' pits at any National or International level event, chances are you've seen them: trademark Stan's black quart bottles with no labels. Look closer and you might have seen strange symbols scrawled all over the bottles in a silver marker, letters and numbers, formula notes by the man himself, Stan Koziatek. For nearly fifteen years Stan has been quietly formulating a special racing version of our legendary sealant for many of cycling's most successful teams. Working with athletes who push themselves and their tubeless systems to the absolute limit, he developed a proprietary sealant formula with close to twice the amount of the standard sealing crystals plus special "XL" crystals capable of sealing even larger punctures. Stan's Race Sealant's combination of large and smaller sealing crystals interlock to form a lattice work that not only seals but strengthens and reinforces the area of the puncture, allowing for an entirely new level of sealing performance. The quantity and size of crystals in this special formula means that Stan's Race Sealant can only be installed directly into the tire. As a result of its immense sealing capabilities, the Race Sealant will clog injectors and smaller bottles almost immediately. Stan's has made Race Sealant available to riders everywhere, and it is only available by the quart. - First choice of riders around the world for tubeless conversion and flat prevention - Twice the amount of Stan's standard sealing crystals - "XL" crystals capable of sealing even larger punctures - Stays liquid 2-7 months for long-lasting protection - Premium low-viscosity formula resists freezing to work in environments as cold as -30° F (-34° C) - Natural materials, safe for the environment

The Product that Started a Tubeless Revolution Inside this simple bottle is a product that changed cycling. Today's tubeless systems rely on the lighter, more reliable, self-sealing performance of Stan's Tire Sealant. Just two ounces of Stan's in a converted standard tire or tubeless tire can repair punctures up to 1/4-inch almost instantly to keep you rolling. Longer-lasting Stan's Tire Sealant is formulated to stay liquid in tires with even thin casings for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart will convert up to 16 tires. - First choice of riders around the world for tubeless conversion and flat prevention - Seals punctures up to 1/4-inch (6.5mm) quickly - Stays liquid 2-7 months for long-lasting protection - Premium low-viscosity formula resists freezing to work in environments as cold as -30° F (-34° C) - Natural materials, safe for the environment - Can be injected through valve stems with removable cores compatible with tubes and tubular tires

Specialized's 2Bliss Ready Rim Strips create a secure barrier, from sealant to rim, in a clean, simple to install strip. Mountain bike riders running 2Bliss can now change tires quicker and easier than with any other tubeless system. Diameter / Width - 26" — 23mm-559 PV - 26" — 25mm-559 PV - 650b — 31mm-584 PV - 650b — 39mm-584 PV - 29" — 23mm-622 PV - 29" — 25mm-622 PV - 29" — 31mm-622 PV

Endurance formula lasts twice as long as standard Orange Seal. - Premium Latex coats the whole casing, from tire bead to tread cap - Seals punctures up to 1/8-inch, and slices up to 1/2-inch with the use of Nanites - Developed to add as little weight to a tire as possible - Made of eco-friendly biodegradable ingredients

Ultra-compact polypropylene case. Kit includes machined aluminum T-handle with combined reamer and insertion tool and five tire plugs. - Weight: 48g

No.9 Tubeless valves for use with Whisky Tubeless rims and most other systems. These alloy stems feature removable Presta cores and are designed to fit up to 8mm valve holes. - Available in a number of lengths and colors to perfectly fit your rims and your sense of style. - Includes two valves

Specialized's Airlock Sealant is the in-tube solution for flat prevention, surpassing the competition in flat protection performance. It's featured here in a personal, 8oz container that's ideal for two standard wheels. - Non-toxic, non-separating formula doesn't have a limited shelf life like the competition. - Coats the tube for permanent protection. - Works with any bicycle tube with a removable valve core. - Works continuously to prevent slow leaks. - Completely homogenous, so it doesn't puddle. - 8oz bottle fills two inner tubes. - 8oz bottle includes valve puller and hose under cap.

Our new 2Bliss Ready Tire Sealant was custom-designed in partnership with a leading laboratory for tire sealants, and it also underwent extensive real-world testing with our Factory Athletes. What we developed is an innovative, ecological formulation that's the answer to the requirements that riders like you've been demanding. It will immediately seal punctures up to 6mm, whether it be on a road or mountain tire, as well as across global temperatures [-20° to 70°C]. Natural, micro holes in the sidewalls will seal well, and the system is safe for use with latex inner tubes, even inside tubulars. Please note that this sealant is ammonium-, protein-, and latex-free, so it holds no potential for allergic reactions, and there's no risk of it creating damage to bike parts. - Proven by our Factory Team Athletes. - Seals punctures up to 6mm. - Performs in a wide temperature range (-20° – 70°C). - Works in latex inner tubes inside tubulars. - Ammonium-, protein-, and latex-free, so there's no risk of allergic reactions or damage to bike parts. Recommended sealant amount per tire: - Road: 24-32mm - 30-40ml - Open Road: 33-50mm - 50-70ml - MTN: 2.0-2.3" 80-100ml - MTN: 2.4-3.0" 100-125ml

Compatible with all tubeless road, MTB and gravel tires. Refill packs with 10 repair plugs (5x thin and 5x thick).

- Double-sided tubular tape for installing tubular tires with no mess or waiting - Special activated surface of gluing tape makes installation and centering of a tubular tire on a rim very fast and easy

Our new RapidAir Tire Sealant was custom-designed in tandem with our new RapidAir tires and Roval wheels to be the fastest tire setup out there. Through development, we learned that high-pressure, 24-30mm tires require a totally different formula to seal punctures. Our new exclusive mixture not only immediately seals punctures up to 3mm across a large range of temperatures, but unlike other sealants, RapidAir sealant will also keep its seal when you reinflate back to normal riding pressure. - Compatible with CO2. - Creates the strongest plug after sealing. - No damage to bike parts. - Performs in a wide temperature range (-20° - 70°C). - Recommended sealant amount per tire: Tire size 24-26mm - 40ml, 28-30mm - 50ml - - - For Maximum performance, use 60ml for any 24-30mm - Seals instantly with minimal pressure lost.

Tubeless repair kit from Muc-Off.

CushCore is an engineered foam insert to be mounted inside a tire, designed to absorb impacts, reduce vibration, and increase lateral stability. These characteristics translate to a more controlled, comfortable, and faster ride. - The system is designed to be used with tubeless-ready or tubeless converted rims and tires and is compatible with tubeless tire sealants - A specially designed tubeless air valve is included with each insert, allowing air to move through the valve without becoming obstructed by the insert - The insert divides the inner volume of the tire in half, maintaining air underneath the tread and the foam insert next to the rim - Fits tire widths 33 – 46mm and inner rim widths 19 – 26mm Includes - 2 CushCore Inserts - 2 CushCore Tubeless Air Valves - 4 Rim Stickers - Installation Instructions