Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Seatposts

$89.99
- 3D forged from 2014 heat-treated aluminum for optimal strength to weight ratio - Race Face's triple butting design maintains strength in critical areas while reducing overall weight - The tube is anodized & shot peened for increased fatigue life - Updated Hunter head design for easy saddle installation and full adjustability - 3D forged from 2014 heat treated aluminum with triple butted mast - Thumbscrew tightening system allows quick dial-in of the saddle angle by hand - Angled clamp bolts allow easy tool access for hassle free adjustment - Rubber grommet seals the post to prevent water from entering seat tube - Accepts 7/8mm CrMo/alloy and 7/9mm carbon rails. 260g (30.9mm)
$53.99
3D forged one-piece AL6061-T6 construction - Wide saddle clamp design reduces rail stress and flex - Micro-adjust 2 bolt clamp design - 15mm setback - ISO-Mountain safety certified
$219.99
Full UD carbon shaft with alloy clamp - Wide saddle clamp design reduces rail stress and flex - Micro-adjust 2 bolt clamp design - Available in 0mm and 15mm setback options - ISO-Mountain safety certified
$55.00
The Velo Orange Grand Cru seatpost is made from one piece of aluminum, internally ovalized to trim weight. The Grand Cru seatpost’s head is integral with the post – not pressed on – for great strength and weight savings. 0mm Setback: Zero-setback/offset posts are commonly used on mountain bikes and by some bikepackers. The Grand Cru zero setback post uses a one-bolt, ergonomic side-adjustment mechanism for both saddle rail clamping and fore-aft adjustment. 30.2mm Setback: For riders who prefer the comfort of leather saddles but have found proper saddle placement difficult due the short rails on leather saddles Velo Orange offers the Grand Cru Long Setback with an ample 30.2mm of setback. This model uses a two-bolt design.
$309.00
Saddle Up Based on the latest FOX Transfer platform with its proven performance, the new Turbine R Dropper Post features a slick seat clamp design for reduced stack height and a 25g weight savings from the previous version. This post will treat you right. Less is More New, patent-pending FOX seat clamp design dramatically reduces stack height, allowing you to fit more travel into a shorter space. Full Coverage Proven FOX-designed internals provide infinite height adjustment, but perhaps more importantly—even easier serviceability. No-Sweat Installation Mounting a saddle and getting your saddle position dialed is easy thanks to the user-friendly seatpost clamp. Brilliantly Uncomplicated Uses standard shifter cable and housing. You know, just to keep things real. Oh yeah—it's also 25g lighter than the previous version. - Compatible with Matchmaker - Includes post only - Mechanical lever actuation - Head Type: Zero Offset—2 Bolt - Weight: 520g
$135.00
A specific eTen hydraulic cartridge with single bolt offset saddle clamp allow the enjoyment of droppers at a low price, available with 100mm of travel. - Black hard anodized stanchion and an air spring, hydraulically locked cartridge - Single-bolt alloy head - Remote sold separately
$309.00
- Built on the revered FOX Transfer platform, the Turbine R Dropper Post has infinite height adjustment with up to 175mm of drop Specs: - Seat Post Diameter: 30.9mm - Travel: 200mm - Cable Routing: Internal
$800.00 - $861.00
Our intention with Reverb AXS was inventive and pure: No hoses. No routing. No energy wasted. Not a single thing in the way of the experience. We created a reliable wireless-electronic dropper post and controller that actuates with drastically less effort and zero distraction. Expanding what's possible on a bike, Reverb AXS is enabled by SRAM AXS technology, a new level of interaction, personalization, and connectivity across all AXS-enabled components. - Effortless Electronic-Wireless actuation and infinite height adjustment with a single touch. - Clean, simple and fast to install. No hoses to route, no fishing required. - Updated internals for faster return speed in all conditions. - New Vent Valve Technology, a simple and reliable built in service solution without disassembly of the seatpost. - SRAM AXS technology, a new level of interaction, personalization, and connectivity across all AXS-enabled components. - Includes RockShox AXS handlebar controller, rechargeable SRAM battery, and charger.
$376.00
The Reverb Stealth features Vent Valve Technology for super simple service if the need arises. Redesigned internals provide effortless actuation and increased reliability. With reduced overall post lengths and new travel options, riders of all shapes and sizes benefit from more travel than ever before. The new Reverb Stealth redefines what it means to simply go up and down. - Shorter overall post length - Stealth Internal cable routing
$319.99
Performance suspension seatposts designed to add comfort and compliance to any bike without adding unnecessary weight. With 35mm of travel, the eeSilk+ is a suspension seatpost designed to noticeably soften any gravel or mixed-surface road. These posts make great enhancements to gravel or mixed surface bikes by reducing the chatter transmitted from the surface to the rider and can be tuned to rider weight through a simple elastomer change. #5 elastomer comes pre-installed, other weight elastomers sold separately - Travel: 35mm - Length: 362mm - Weight: 323g (27.2mm), 333g (31.6mm) - Max Rider Weight: 250lbs - Offset: 12mm - Minimum Extension: 80mm - Maximum Extension: 287mm
$219.99
Ride longer, ride farther with the eeSilk premium suspension seatpost. The eeSilk is comparable in weight to traditional rigid performance seatposts while offering 20mm of vertical compliance improving control on rough surfaces and reducing fatigue on long rides. These posts make great enhancements to endurance road bikes by reducing the chatter transmitted from the surface to the rider and can be tuned to rider weight through a simple elastomer change. #5 elastomer comes pre-installed, other weight elastomers sold separately. - Travel: 20mm - Length: 375mm - Weight: 345g (eeSilk 27.2) - Max Rider Weight: 250 lbs. - Offset: 8mm
$319.99
Ride longer, ride farther with the eeSilk Carbon premium suspension seatpost. The eeSilk carbon is comparable in weight to traditional rigid performance seatposts while offering 20mm of vertical compliance improving control on rough surfaces and reducing fatigue on long rides. These posts make great enhancements to endurance road bikes by reducing the chatter transmitted from the surface to the rider and can be tuned to rider weight through a simple elastomer change. #5 elastomer comes pre-installed, other weight elastomers sold separately - Travel: 20mm - Length: 350mm - Weight: 295g (eeSilk Carbon 27.2) - Max Rider Weight: 250 lbs. - Offset: 8mm
$199.99
The latest generation Thudbuster LT is superior to its predecessor in every way.  Building on Thudbuster's proven parallel linkage technology we have completely re-designed the seatpost for increased durability, additional suspension travel, as well as ease of use through tool-free elastomer change and a single-bolt seat clamp design. By improving on this already legendary design, we're confident to say that the newest generation Thudbuster is the most advanced suspension seatpost ever made. - Travel: 90mm - Weight: 750g (31.6mm) - Max Rider Weight: 250lbs
$633.00
The new Reverb AXS XPLR dropper post delivers more control, confidence, and fun on gravel roads everywhere. Getting the saddle out of the way means more room to move, saving you from awkward maneuvering and sketchy descents. We created an all-new design complete with lightweight air-only internals featuring built-in compliance we call ActiveRide. It's like travel for your saddle. Enabled by SRAM AXS technology, Reverb AXS XPLR is part of the ultimate personalized cockpit. - New 27.2mm Reverb AXS XPLR delivers more control, confidence, and fun for gravel - ActiveRide—Air only internals provide a fully rigid top-out position. With the touch of your AXS controller, you've got built-in compliance to ensure comfort and control over the roughest sections of gravel - Two travel options to choose—50mm or 75mm - Saddle clamp options compatible with 7x10 oval carbon rails. - Seat post length includes 400mm and 350mm (50mm drop only) - AXS Technology allows rider customization via the AXS Mobile App - AXS handlebar controls (drop or flat bar) - Shared battery with all other SRAM AXS enabled components - System is completely waterproof and dustproof to IP69K—take it anywhere - SRAM AXS battery and charger included SPECIFICATIONS: - TRAVEL: 50mm, 75mm - POST DIAMETER: 27.2mm - POST LENGTH: 350mm, 400mm - REMOTE: AXS Controller Sold Separately - SADDLE RAIL COMPATIBILITY: Round/Oval (7x9 & 7x10), Round/Oval (7x9) - WEIGHT (G): 562 - WEIGHT BASED ON: 75mm Travel 400mm Length W/O battery - Battery 25g
$329.00
- XC - Gravel - Trail focused post - Two-position simplicity - Featherweight - Cable routes in either direction for compatibility with any dropper lever - Zero offset - 352g
$250.00
This replacement seatpost for the Tarmac SL8 ensures the perfect fit with two different setback options—0mm and 20mm. - FACT carbon construction and aerodynamic profile compatible with the 2024 Tarmac SL8. - Setback: 0/20mm. - 20mm offset: 2-bolt micro-adjust clamp with 46mm saddle rail cradle enables an effective offset from 0mm to 20mm. - 0mm offset: Cylindrical aluminum head assembly adjusts fore-aft and tilt with an easy-access single bolt.
$250.00
This replacement seatpost for the Tarmac SL7 ensures the perfect fit with two different setback options: 0mm and 20mm. - FACT carbon construction and aerodynamic profile compatible with the 2021 Tarmac SL7. - Setback: 0/20mm. - Sleek Di2 integration hides the Di2 junction box inside. - Cylindrical aluminum head assembly adjusts fore-aft and tilt with an easy-access single bolt.
$250.00
This replacement seatpost for the Tarmac SL7 ensures the perfect fit with two different setback options—0mm and 20mm. - Cylindrical aluminum head assembly adjusts fore-aft and tilt with an easy-access single bolt. - FACT carbon construction and aerodynamic profile compatible with the 2021 Tarmac SL7. - Setback: 0/20mm. - Sleek Di2 integration hides the Di2 junction box inside.
$99.95 - $200.00 $200.00 Up to 50% Off
This replacement seatpost for the Shiv Disc ensures the perfect fit with two different setback options— 0mm and 25mm. - Aerodynamic FACT carbon construction that's compatible with the Shiv Disc. - Profile that integrates with the shape of the rear Hydration Fuelcell for maximum aerodynamic performance. - Cylindrical aluminum head assembly adjusts fore/aft and tilt with a single bolt. - Setback: 0/+25mm
$225.00
This is the first seatpost that’s compliant AND aerodynamic—a total win, win. We initially developed the Pavé seatpost for the all-new Roubaix, and it’ll make a fantastic addition to your Tarmac SL6. Of course, it’s also designed to make fine-tuning your saddle position a breeze with a single-bolt adjustable head and two setback options. - FACT carbon construction paired with a D-shaped seatpost that's compatible with the 2020 Roubaix and Taramc SL6. - Engineered to have the saddle move in a perfect arc, aka a back & downward motion. - Setback: 20mm/0mm - Cylindrical aluminum head assembly adjusts fore/aft and tilt with a single bolt. - Length: 380mm/450mm - Approximate Weight: 209g
$39.99
- Anodized silver clamp with an anodized and fluted grooved post - Length: 350mm - Material: Alloy - Setback: 25mm
$275.00
ENVE's proven twin-bolt seatpost design refined for the modern road bike with seatpost battery integration capabilities. - Material: Carbon Fiber - Hardware Material: Titanium - Saddle Angle Adjustment: 0 – 27 degrees - Saddle Rail Compatibility: 7x10mm Carbon Rails / 7mm Round Alloy Rails - Torque Spec, Saddle Rail Clamp Bolts: 5.5Nm - Torque Spec, Seatpost Collar: Determined by your Frame manufacturer/Seatpost Collar - Weight: 210g (25.4mm), 204g (27.2mm), 204g (30.9mm), 204g (31.6mm)
$60.00
On today's road bikes, silver stands out amid the sea of stealthy black color schemes. This time-honored seatpost color is available on the Zipp Service Course Seatpost. Since the introduction of our line of Service Course and Service Course SL components, we've had amazing success with our pro-level athletes in all disciplines. While the successes have reinforced our design decisions, we have also drawn from their feedback. We not only learned how and why athletes make their equipment choices, but how our manufacturing methods and materials affect product performance. With new knowledge as well as new engineering, we are proud to offer redesigned Service Course seatposts. - Material: 6061 aluminum - 2-bolt adjustability - Minimum insertion length: 90mm
$199.99
The latest generation Thudbuster ST is superior to its predecessor in every way. Building on Thudbuster's proven parallel linkage technology we have completely re-designed the seatpost for increased durability, a higher rider weight limit, and additional suspension travel, as well as ease of use through tool-free elastomer change and a single-bolt seat clamp design. By improving on this already legendary design, we're confident to say that the newest generation Thudbuster is the most advanced suspension seatpost ever made. - Travel: 50mm - Weight: 580g - Max Rider Weight: 330lbs
$43.99 - $46.19
• Aluminum • Coil spring provides plush suspension • Adjustable pre-load design • Micro-adjust seat clamp • 450 grams
$189.99
The Cascade dropper post pays homage to the Cascade mountain range, home to some of the best riding in the PNW. This post is a workhorse: it’s super reliable, loved by our customers, and now features multiple travel options. The Cascade provides dependable up and down service for the miles to come, and maintenance on the Cascade is easy (like all our droppers). Plus, external routing at the mid-cap ensures your cables are kept nice and tidy during up and down actuation. You can find sweet upgrades to the Cascade’s OG dropper design on the posts featuring 150/170mm of travel. These models have larger diameter stanchions, making them stiffer and lighter… which is sweet because who wants a bike part that’s heavy and too compliant? These longer travel models also come with an added DU bushing to combat seat wobble, because let's face it… the only thing that should be wobbly on your bike are your legs after a long ride. Levers: - Choose from our Loam Lever, Puget 1x or 2x drivetrain compatible levers, or Roadie/Drop Bar Lever Kit for road bars - 1x Lever - Designed to be used with bikes using a single front chainring, this is a "shifter style" lever - 2x lever - Designed to play nice with front shifters, this is a "vertical" lever that accommodates for the shifter on the left side of your handlebar Product Specs: - Choose any lever kit - 30.9 & 31.6mm Diameters - Weights: 125mm - 608g, 150mm - 613g, 170mm - 674g - 2-bolt Micro Adjust Head - Fixed External Routing at the Mid Cap for clean cable routing - 3-year warranty!
$199.99
The Highline 3 delivers infinite adjustment, smooth feel, and easy installation. Details - Premium Trelleborg sealing - Exclusive Igus LL-glide bearings and keys - Jagwire cable and housing - Self-contained hydraulic cartridge delivers industry-leading quality and reliability - Internal routing - Quick connect mechanism for ease of cable installation - Linear actuator for quick return speed - 2-bolt standard head - Remote sold separately
$89.95
The redesigned Zero post offers no-slip saddle engagement and high adjustability by securing the rails with fore and aft bolts. Whether you're hitting rough singletrack or remounting in a hurry, this ensures the saddle stays exactly where you want it. - Material: 2014 alloy - Total length: 400mm (including 100mm of minimum insert) - Saddle clamp: 2-bolt fore/aft - Saddle clamp torque: 7Nm (max) - Seat collar torque: not specified - follow frame/seat binder specification - Weight: 240g (27.2x400mm)
$69.95
The proven 2-bolt design on this classic provides a class-leading balance between strength, weight, and adjustability. The two-bolt design is easy to adjust and holds tight. Its low profile clamp reduces stress on lightweight rails and won't bottom out, and the bolts are oriented to the axis of the rails for the greatest contact area with the saddle. The Classic also features Ritchey's 'Classic' high-polish silver finish. - Material: 2014 alloy - Total length: 350mm (including 100mm of minimum insert) - Saddle clamp: standard - Saddle clamp torque: 13Nm (max) - Seat collar torque: not specified - follow frame/seat binder specification - Weight: 260g (27.2x350mm) - Color: high-polish silver
$300.00
- Aerodynamic FACT carbon construction that’s compatible with the 2019 Venge - Sleek Di2 integration hides the Di2 junction box inside - Cylindrical aluminum head assembly adjusts fore/aft and tilt with a single bolt