$15.00 - $25.00
A simple, compact system to carry everything you need to fix a flat without weighing you down. - Patent pending design allows the spare tube to be rolled up while protecting valve stem from rubbing a hole through the rubber - CO2 valve head and 2-sided tire lever snap into place for compact and secure storage - Holds a single threaded 16g CO2 cartridge - Fits up to 80mm long tube valve stems
Easy to use, easy to control and affordable. The Mircoflate Nano gives you the best bang for your buck when it comes to quality and ease of use. Simply thread on your favorite CO2 cartridge, twist the cartridge off slightly to engage inflation and tighten it back on to shut it off. Petite power! - Compact and nearly indestructible - Easy to use and fully controllable - Patented twist-to-inflate technology - Press on to both Schrader and Presta valves - Compatible with 16 gram, 20 gram and 25 gram threaded CO2 cartridges Product includes: (1) Microflate Nano inflator head (1) threaded 20 gram CO2 cartridge
$20.00 - $35.00
The MTN Tube Spool is a simple, compact system that'll carry everything you need to fix a flat without weighing you down. To do so, its design allows for a spare tube, with up to a 48mm valve stem, to be rolled-up without damaging the tube. Meanwhile, the Spool can easily hold a lever, CO2 cartridge, and a valve head. - Patent-pending design allows the spare tube to be rolled up while protecting valve stem from rubbing a hole through the rubber. - CO2 valve head and two-sided tire lever snap into place for compact and secure storage. - Holds a single threaded 25g CO2 cartridge. - Fits up to 48mm long tube valve stems. - Hook and loop strap can slide side to side to accomodate all different size mountain tubes
Genuine Innovations' Mountain Pipe captures the best of both worlds by combining a CO2 inflator with a manual pump. It fits Presta and Schrader valves and smartly controls the flow of CO2 with Twist-to-Inflate technology. And, you'll never run out of air thanks to the built-in hand pump. The Mountain Pipe also features a hidden container in the handle to store patches and comes with a threaded 16-gram cartridge to get you going.
The most intuitive CO2 inflator on the market. All you have to do is twist your favorite CO2 cartridge into the HammerHead, and at the push of a button, you're back on the trail. As an added bonus, the HammerHead automatically detects your valve type for instant valve attachment while the trigger head leverages our patented push-to-inflate technology. - Easy and controllable inflation - Push-to-inflate technology - Auto detect head for instant Presta or Schrader valve attachment - Lightweight, compact design - Weight: 26 grams Includes: (1) HammerHead inflator (1) threaded 20 gram CO2 cartridge
Serfas has the basics covered with the Combo Kit. It comes with their Micro Blast CO2 inflator, 2 16-gram threaded cartridges, a 6-piece mini-tool, and a set of tire levers, as well as a seat bag to carry it all.
The easiest way to use CO2. - Gauge confirms proper inflation, making it easy to adjust pressure mid-ride. - Thumb trigger gives precise control. - Accommodates threaded 16g and 25g cartridges. - One 16g CO2 cartridge included.
$10.99 - $19.99
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - MTB 50 mL: Repairs and inflates low-volume MTB tires in less than a minute. - MTB Magnum 75 mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
$3.25 - $71.98
- Standard threaded cartridges are 3/8" x 24tpi thread to fit any brand inflator - Law prohibits ORM-D materials from shipping by air - Box includes 20 CO2 cartridges
16 grams of Genuine Innovations' most popular size CO2 cartridge. Perfect for road tires and standard bike tires. These threaded CO2 cartridges are compatible with all Genuine Innovations inflators.
A CO2 inflator and mini tool in one, Serfas's ST-13i features 1.5, 2, 3, 4, 5, 6 and 8mm Allen keys. It also has Phillips and flathead screwdrivers, T25 and T30 Torx wrenches, and CO2 inflator head (cartridges sold separately). This compact, metal mini tool nearly does it all.
Whether you are touring or commuting, Genuine Innovations' Deluxe Tire Repair & Inflation Wallet packs easily into a jersey pocket or bag. This repair kit features their Ultraflate Plus cupped inflator, patch kit, tire levers, and enough CO2 for you and a friend. After patching your damaged tube, CO2 inflation is a breeze. Built-in Trigger lock prevents accidental activation. Push-on for Presta, screw-on for Schrader. Really easy to use. Simply drop the CO2 cartridge into the cup, screw on the head, attach to valve, unlock safety latch, attach to valve stem and pull trigger to release gas. So quick and easy you’ll be back to riding your bike in no time! • Includes the UltraFlate Plus CO2 inflator • Includes three 16 gram non-threaded CO2 cartridges • Includes a small patch kit & two tire levers • Packaged in a large 5.5 x 6.5 x 4.5-inch zippered wallet. • Built in Trigger Lock prevents accidental discharge • Works with both Presta and Schrader valves • Cartridge compatibility: 12, 16, 20, 25 gram threaded or non-threaded CO2 cartridges & Big Air! (each sold separately) • Construction: Glass reinforced nylon with brass internals. • Weight: 62 grams
This extra-large, 40-gram threaded air canister packs as much volume as two 20-gram cartridges with half of the weight while boosting available pack space. - Inflator operates at temperatures above 40 degrees Fahrenheit - Canister contains propane for lighter canister weight and increased gas volume - Propane does not affect tubeless sealant - Canister must be used with nozzle facing down - Fits 3/8-inch threaded inflators with 5mm depth from pin to edge of threading
Page 1 of 1