Parts & Accessories

The Wheels Manufacturing PressFit 30 Bottom Bracket Adaptor for Shimano Cranks adapts 24mm Spindle Cranks (Shimano Hollowtech II, FSA, Race Face EXI, etc.) to work on PF30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin. Notes: - PF30-SHIM was originally designed for use with SRAM PF30 bottom brackets and will not work with Wheels Manufacturing PF30-BB, PF30-BB-AC or PF30-BB-CER. Use Wheels Mfg BBUNIV-SHIM to adapt 24mm Spindle Cranks (Shimano, FSA, etc.) in Wheels Manufacturing PF30 bottom brackets. - Not compatible with SRAM PF30 bottom brackets that use a thin plastic reducer inserted into the bearings. - The stock bottom bracket seals must be removed before installing the Pressfit 30 adapter

TruVativ's Stylo All Mountain Guard is all-mountain chainring protection with style. This 4mm thick aluminum guide is 4 bolt, 104 BCD compatible.

Fits 19mm team & talon cranks: - Splines: 48 - Diameter 19mm - Length: 5.5" (140mm) - Spindle bolts: 3/8" X24tpi (not included) - Also fits: Cult OS, Demolition Revolt, Rant 48-S, WTP Royal, Redline Device and other 19mm 48 spline cranks

Race Face aluminum chainring bolts for inner chainrings. Includes four 12.5mm bolts.

Race Face steel chainring bolts. Includes four sets of 12mm bolts/nuts for inner and outer chainrings.

- Replacement bolt for DUB cranks

Stunning Force AXS graphics on a carbon fiber arm: these crankarms are winners. Available in lengths from 165 to 177.5mm and in standard and Wide Q-factor so every rider can achieve their proper fit. The 8-bolt interface will fit any SRAM AXS spider or integrated chainring, with or without power. The light, stiff, and durable DUB spindle interface also fits nearly any frame. - 8-bolt interface compatible with power and non-power AXS spiders and integrated chainrings - DUB bottom bracket adds durability and simplicity - Carbon fiber arms with gloss finish

- Sunlite Cottered Pins

- Chainring bolt sets are available in sets of four or five - Bolts have 5mm hex heads - Material: Steel - Type: 2x

- BCD: Direct Mount Shimano - Chainline: 55mm - Crank Arm Length: 170mm - Material: Aluminum - Interface: Hollowtech II - Speed: 11/12 - Crank Spindle Diameter: 24mm - Drivetrain Spacing: SuperBoost+ - Pedals Thread: 9/16''

When you need the best from your training data, the accuracy and reliability of the Force AXS Power Meter spider for thread mount 2x chainrings is the way to go. The spider design uses a proprietary thread-on chainring mount system which allows us to reduce weight and increase stiffness without compromising the ability to swap rings. This dual sided power measurement system, it’s accurate to +/-1.5% even as weather conditions change, and boasts unbeatable battery life. - Thread Mount design is light, stiff and accurate, and fits Force 2x Thread Mount chainrings (Chainrings sold separately) - Dual sided power measurement system, it’s accurate to +/-1.5% even as weather conditions change, and boasts unbeatable battery life (User replaceable CR2032 battery with 200-hour battery life) - Bluetooth low energy technology and ANT+ wireless data transfer - MagicZero automatically checks and recalibrates your power meter as you ride - No cadence magnet required - 10K Temperature Compensation and Waterproof (IPX7 waterproof to 1 meter for 30 minutes) - AXS™ enabled for easy monitoring and firmware updates - Includes 8 bolts and thread back up pin for chainring

SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly intact. - For Descendant Carbon and non-Eagle XX1 and X01

• ISIS interface • Only includes left crank • 175mm length

Race Face CINCH Spindle

Trail riding can be tough on your gear. The ends of your Next SL G4 cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips!

- Enables the use of various cranks with BB386EVO PF30 or BB30 bottom brackets - Spacers and adapters only specific bottom brackets are required and sold separately

Replacement crank arm for X5 GXP

This very light, stiff, and strong carbon crank spider optimizes your power transfer. - Stiff and lightweight. - For use with S-Works carbon road cranks.

Race Face Crank Arm Fixing Bolts - M18 Crank Bolt - Fits 15SX/Atlas/SixC CINCH - Not self-extracting

RaceFace CINCH Spindle - Fits 135/142 and 141/148mm Hub Spacing

Machined engineering-grade Delrin inserts for adapting bottom brackets to a different type of crankset spindle. - Adapts PF30 and Cannondale BB30-73A bottom brackets for use with SRAM/TruVativ cranksets - Delrin adaptors fit between bearings and crank spindle - BB Shell Width (mm): 68 mm , 73 mm - Spindle Interface Type: TruVativ GXP - BB/Frame Interface: PF30

The Wheels Manufacturing 386 EVO Adaptor for Shimano Hollowtech II Cranks adapts Shimano cranks to 386EVO-standard frames. Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline, or to take up any side-to-side movement in the crank. - Machined engineering-grade Delrin - 48g/pr Includes - (2) - 24mm ID adapters - (8 )- .7mm spacers