Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Other

$14.50
- Add to older versions of the SuperStand to extend height to accept 29er wheels
$2.00 - $7.00
You can proudly display these Surly Logo Stickers just about anywhere they'll fit. They comes in three sizes to meet a wide range of sticking needs.
Nylon beaded cable ties - 8-inch - Reusable
$26.00
This adaptor makes 135mm rear MTB axle compatible with any stationary fluid/wind trainer. - Stainless steel construction for durability. - Fits 135 x 12mm rear axle. - Compatible with 5mm Allen for easy installation.
$25.00
Keep your ride upright and looking fly with Specialized's Center mount kickstand! - Made of durable aluminum.
$22.50
2-bolt dropout mount, allowing a bike to be kept upright. - Made of durable aluminum - Compatible with: Crosstrail and Ariel A1 Disc bikes (up through MY14) - 2012-2014 Hardrock and Myka models - Crossroads and Expedition models (up to MY13) with 2-bolt dropout mount
$100.00
Mate Specialized's Clip-On Clamp to a pair of aero extension bars and get time on your side. Their 22.2mm diameter is compatible with many standard aftermarket extensions, and with a one-bolt hinge system, they're simple to install.
$50.00
Specialized's S50 aluminum extensions allow for a low aggressive aero position or a high-leverage position for climbing. Their 22.2mm outer diameter is compatible with many standard aftermarket aerobar clamps, and at 400mm long, they can be cut to fit your specific reach.
$20.00
This bike kickstand was developed specifically for the Turbo Tero, allowing you to keep your bike upright on its own. If you need to complete your kit or replace a bike kickstand, this two-bolt dropout mount kickstand will do the job for you. Turbo Vado, Como, and Tero EQ come already equipped with a kickstand. - Durable aluminum construction. - Simple, two-bolt dropout mount allows for easy assembly. - Fits 40mm adapter plates. - Length: 362mm
$40.00
Turbo Chainstay-Mounted Kickstand - 323mm.
$141.00
Park's Shop Stool boasts a super-comfy padded seat, sturdy chrome-plated-steel legs and Park's colorful logo on top. The seat spins 360 degrees and is positioned at a height of 32 inches, which is perfect for wheel truing and all other work at a bench or counter.
$20.99
- EverClear Roll is 12 micrometers (µm) thick and offers 2 x 60-inches of high-quality protection film - It's designed to protect your frame against anything from rock chips to cable rubs and everything in-between. - Included is a sheet large enough to cover your down tube, top tube, chain-stay, cable rub points and crank arms. Also works great for fork lowers, shock bodies, and more! Especially great for protecting carbon frames or decals. - It’s easy to cut and apply—simply trace and cut your desired pattern(s), clean your surface, and apply where necessary! - Want to boost re-sale value of you bike? EverClear is your ticket! By applying this stealthy 12µm protection to your frame when it’s new, you can preserve that new look without using any bulky and ugly frame protection. Then, when it’s time to sell, you can remove the EverClear, and you are left with a beautiful like-new bike that’s ready to get top dollar in re-sale. - Made in the USA
$14.99 - $26.99
Lizard Skins adhesive bike protection offers protection from nicks and scratches and is made with high performance adhesive. - 64mm wide x 305mm long - 3 Extenders included for desired protection
$7.49 - $9.49
The Lizard Skins Patch Kits are made with high performance adhesive and will protect your frame from nicks and scratches. All patch kits come with 2 large, 4 medium and 2 small patches. - 14 mils thick for premium durability - UV resistant – won’t fade or discolor
$7.99 - $10.99
Lizard Skins adhesive bike protection offers protection from nicks and scratches and is made with high performance adhesive. - 32mm wide x 222mm long - 3 extenders included for desired protection
$49.99
Introducing the Piston® Pro X LICENSE PLATE MOUNT. Simply remove the endcap, and attach the mount to achieve unparalleled visibility on the road. Upgrade your ride and hit the road with confidence and style. - For use with Piston® Pro X - Billet machined aluminum - Rotates for use in stowed or in-use position - Black Anodized
$9.99 - $14.99
Greenfield's Kickstand attaches quickly and easily to most bicycles and provides a safe and convenient way to park your bikes at home and on the road and trail. It's also durable, lightweight, and looks great on any bike. Plus, it's made of a special non-corrosive aluminum and is built to last. You'll want one on all your bikes! - 285mm (for bikes 22" and under), 305mm (for bikes 22" and over) - For bikes without factory mounting plate (includes top plate and bolt) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface
$9.99 - $14.99
The Greenfield KS3 is a center-mounted kickstand. It's lightweight, durable, and looks great on any bike. The kickstand is constructed from aluminum and made in the USA. - For bikes with a factory mounting plate (includes bolt) - 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface
$20.99 - $24.99
Greenfield's Stabilizer Rear-Mount Kickstand attaches to the rear chainstay of the bicycle so it's perfect for bikes that won't accept regular kickstands like mountain bikes. It comes complete with an extra wide rubber foot for superior stability and won't interfere with pedal action or rear derailleur cables. This is the stand of choice for law enforcement bike patrols throughout the U.S. - Fits tube sizes up to 7/8" in diameter - Certified Non-Corrosive Casting - Snap Action Mechanism - 285mm (for bikes 22" and under), 305mm (for bikes 22" and over)
$9.95
Light-duty zip tie - 200mm length x 2.5mm - Bag of 100
$12.99
- Designed to fit most lightweight, midweight, and cruiser bicycles - Fits frames with welded-on mounting plates - Made in the U.S.A.
$9.09
The Elegance aluminum fixed-length kickstand is available in three lengths for different wheel sizes.
$49.95
Allows Thule Yepp Maxi to be quickly installed on any bike with a rear rack with a load capacity of 25 kg/55 lbs. Features: - Fits rear racks measuring 11-17 cm/4.5-6.7 in
$90.00
The Surly Deck Bar is just what it sounds like, a convenient handlebar that attaches to the rear deck of the Big Easy, Big Dummy or Big Fat Dummy. Once attached, you will find that this is a very nice place for your passengers to grip and hold on tight while you cart them around town. I mean it’s that or the old uncomfortable around the waist hug move. You can decide what’s best for you and your passengers. Grips are also included with the bar, so you’ve got that going… - The Deck Bar attaches directly to the Dummy Deck to offer a secure hand grab for passengers - Provides a solid, comfortable handhold for riders large and small - Also available as part of the Corral Kit
$40.00
The Surly Deck Pad is the ultimate in cargo bike derrière accessories. Sold individually, the Surly Deck Pads are designed to easily attach to the rear decks of our Big Easy, Big Dummy and Big Fat Dummy for a luxurious passenger riding experience. Simply put, they make riding on the back of our cargo bikes even nicer. Two Pads will cover the whole deck, so there, now you know. You could probably even convince your ride-along friends or children to chip in and help pay for them. After all, nobody rides for free. - The Deck Pad mounts to the Dummy Deck to provide a soft platform for passengers large and small - Sold each - Also available as part of the Corral Kit - Individual Deck Pads measure approximately: 13”x8”x2”
$10.00
Pop this replacement headbadge on your Surly and it's good as new.
$8.00
Surly's Junk Straps can secure almost anything to almost anything else. Essentially an extra long toe strap, they're easy to use and store. And, trust us, these handy straps will get used often.
$15.00
Surly made these handy plates for use with either the Long Haul or Disc Trucker frames, and only the Long Haul and Disc Trucker frames. They are to be used with a bicycle kickstand to keep your bicycle upright while not moving as if by magic. The plates consist of two halves that, when clamped on your frame in conjunction with a kickstand, protect your chainstays from hamfisting by sandwiching the frame between the plates. Have you ever eaten a hamfist sandwich? They taste terrible, so avoid them like the plague. - Compatible with 2019 and older Long Haul and Disc Trucker frames
Page 1 of 4 Next page