Other

A neoprene pogie designed to allow riders to change positions from hoods to drops without removing hands from the mitts. Internal or external cable routing options. - Water-proof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars and can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands

A neoprene pogie designed to work with flat or riser style handlebars to keep hands warm when encountering the cold, wind, rain and/or snow. - Waterproof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars - can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands - Vent zipper can be opened if hands start to overheat - Measures 10" wide by shifters/brakes

A neoprene pogie designed to fit on handlebars to keep hands warm when encountering the cold, wind, rain and/or snow. - Waterproof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars - can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands

A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts, and is designed to work with flat or riser style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - The original S/M size is designed to fit most, measuring 10" wide across shifters/brakes and 11" long - Large size is designed for 10.5" wide across shifters/brakes, measures 12" long, and has a 1" gusset on the inside and outside seam

A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts, and is designed to work with flat or riser style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - The original S/M size is designed to fit most, measuring 10" wide across shifters/brakes and 11" long - Large size is designed for 10.5" wide across shifters/brakes, measures 12" long, and has a 1" gusset on the inside and outside seam

A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts, and is designed to work with flat or riser style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - The original S/M size is designed to fit most, measuring 10" wide across shifters/brakes and 11" long - Large size is designed for 10.5" wide across shifters/brakes, measures 12" long, and has a 1" gusset on the inside and outside seam

EBike Handlebar Cover - Protects handlebars and controls while transporting on bike rack - Strong and lightweight: made of rip stop nylon with PU coating - Easy to attach: uses straps & zipper - Universal: fits handlebars to 82cm (32 inches) - Protection: Keep your expensive controls safe from the elements

Protects your Handlebars with installed mirrors, phone holders, display and calipers, from the elements. Great for protecting while on a car rack too. - Works with large or small handlebars with mirrors, lights, bells, and/or phone holders - Protects all kinds of Handlebars such as Ebikes. Road Bikes, & Mountain Bikes - Has elastic and 4 hook and loop straps to keep attached and secure - 36" x 8" Depth. It has elastic and hook and loop straps so it is very adjustable and the depth can be increase because of the hook and loop straps. It will fit almost any handlebar with phone holders, lights, and/or electronic displays.

Disc Brake Covers are protecting your bike disc brakes during maintenance or transit. A must have addition for mounting your bike on a car rack and for clean up to keep your rotors clean and protected. Our Disc Brake Covers are made from breathable neoprene material that enables you to simply rinse them off and reuse them. Attaching is a snap with the 2 zippers on each cover.

Protects Your Battery From The Rain, Snow and Keeps the Battery Insulated - Insulates battery to help operate more efficiently - Protection against the elements while riding or transporting on a car rack - Scratch protection - Pocket for phone (keys or wallet) - 4mm neoprene black - Medium: Fits diameters 3.5" to 4.5" in diameter - Large: Fits surface-mounted battery and is compatible with Bosch, Shimano Steps, Samsun, Yamaha.

Insulated, flame resistant, water resistant cover for battery on E-Bike. Keeping your battery at normal operating temperatures improves performance and battery life. Also, protects the battery from rain, sun, and elements while on car rack. - Made with water-resistant nylon - polyester on outside for excellent water resistance. - Inner material made with fire and flame-resistant materials (passes FMVSS 302 Flame Test) - Fits surface-mounted battery and is compatible with Bosch PowerPack, Shimano Steps, Samsung, Yamaha - Pocket on top to keep small items close at hand. - Mounts with drawstring and hook and loop.

Ebike or Bike Cover to protect your bike from the elements. Made with 300D Ripstop Nylon with water resistant coating. Fits most ebikes, fat tire, and 29" wheeled bikes. - Cinch straps included to tighten cover against bike & heavy-duty elastic drawstring - Cover is 73” x 34” x 44” high (height at the handlebars) - Zippered opening for easy access to battery and bike - Metal Grommets to use with bike lock - Reflective handles and trim - Convenient carry bag Note: Due to the large number of vehicle makes/models, state laws, different hitch mounts, size of bikes, we do not guarantee the cover will not obstruct rear view vision. It is the responsibility of the buyer to ensure they are following state laws and mount bikes that are safe for travel.

- Fits two ebikes or a large cargo bike - Made of tough, lightweight 300 Denier Nylon with a water-resistant coating. - Zippered opening allows access to bike and battery - Metal grommets work with bike locks - Fits with front and rear bike racks - Elastic shock cord cinch strap and 2 separate long traps to tie down cover - Dimensions: 78" x 47" x 35" Note: Due to the large number of vehicle makes/models, state laws, different hitch mounts, size of bikes, we do not guarantee the cover will not obstruct rear view vision. It is the responsibility of the buyer to ensure they are following state laws and mount bikes that are safe for travel.

Completely encloses the bikes and seals at the hitch so you can rest easy knowing rain, road debris, and inclement weather will not wear on your bikes. Made Heavy Duty translucent reinforced scrim material that encloses the entire bike. Perfect for road trips for the back of your RV, Van, Truck, SUV, Trailer, or Vehicle. Fits standard and extended wheel base bikes. - Adjustable: Fits 1 or 2 bikes with adjustable straps. - Protects: Bike are safe from UV, water damage and debris. - Easy to Install: Fits almost any hitch-mounted bike rack, designed for large SUVs and RVs. Included bungee straps must be used to securely strap down extra material, failure to do so could cause unneeded air drag and cover damage. - Size: 80" (L) x 36" (W) x 50" (H) Note: Due to the large number of vehicle makes/models, state laws, different hitch mounts, size of bikes, we do not guarantee the cover will not obstruct rear view vision. It is the responsibility of the buyer to ensure they are following state laws and mount bikes that are safe for travel.

- Proofide is the only substance that should be used to care for all Brooks Leather Saddles - A new saddle should be treated with Brooks Proofide leather dressing to help assist the breaking-in process - Proofide keeps the leather supple as it is specially formulated from natural ingredients to condition, preserve and shower proof the saddle

Designed by Tullio Campagnolo, the BIG Corkscrew is a signature of artisanship of the Campagnolo brand and a masterpiece of functionality. 100% made in Italy by Italian craftsmen. Telescopic, self-centering bell perfectly positions the screw in the center of the cork - Screws harken back to seventies era Super Record cranks - Packaged in a collector's box - Two levers pull the cork out easily and delicately ensuring the bottle is not shaken, distubing sediment in aged wines - Designed so the screw will never completely twist through the cork, preventing pieces of cork dropping into the wine - Bronze is finished in a "vintage" hand-produced look. Satin is a great match for modern interior decor thanks to its sheen typical of steel

Clear stick on chainstay and frame protectors.

The Greenfield RetroKit is a retro-mounting kickstand plate designed with a cutaway to clear derailleur cables. - Fits all Greenfield kickstands and most generics - Made in the USA

Greenfield's Kickstand attaches quickly and easily to most bicycles and provides a safe and convenient way to park your bikes at home and on the road and trail. It's also durable, lightweight, and looks great on any bike. Plus, it's made of a special non-corrosive aluminum and is built to last. You'll want one on all your bikes! - 285mm (for bikes 22" and under), 305mm (for bikes 22" and over) - For bikes without factory mounting plate (includes top plate and bolt) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface

The Greenfield KS3 is a center-mounted kickstand. It's lightweight, durable, and looks great on any bike. The kickstand is constructed from aluminum and made in the USA. - For bikes with a factory mounting plate (includes bolt) - 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface

This kit includes a Greenfield center-mounted kickstand as well as a mounting plate that's designed with a cutaway to clear derailleur cables. The kickstand is lightweight, durable, and looks great on any bike. It's made of aluminum and made in the USA. - 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface

The Greenfield KS5 is a center-mounted kickstand. The kickstand is constructed from aluminum and made in the USA. - 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over) - Includes extra long bolt - Kickstand can be cut to a specific length - For bikes without factory mounting plate (includes top plate and bolt)

Greenfield's Kickstand attaches quickly and easily to most bicycles and provides a safe and convenient way to park your bikes at home and on the road and trail. It's also durable, lightweight, and looks great on any bike. Plus, it's made of a special non-corrosive aluminum and is built to last. You'll want one on all your bikes! - For bikes without factory mounting plate (includes top plate and bolt) - 285mm (for bikes 22" and under) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface

Greenfield's Stabilizer Rear-Mount Kickstand attaches to the rear chainstay of the bicycle so it's perfect for bikes that won't accept regular kickstands like mountain bikes. It comes complete with an extra wide rubber foot for superior stability and won't interfere with pedal action or rear derailleur cables. This is the stand of choice for law enforcement bike patrols throughout the U.S. - Fits tube sizes up to 7/8" in diameter - Certified Non-Corrosive Casting - Snap Action Mechanism - 285mm (for bikes 22" and under), 305mm (for bikes 22" and over)

Who knows more about dog attacks that the mailman? Letter carriers have had to deal with aggressive dogs since Claudius Polonius was delivering rolls of parchment to citizens of the Roman Empire. So what do the experts use to repel dog attacks? Well, the U.S. Postal Service has been using Halt! Since 1966. You might say they have been conducting field tests for over forty years. Halt! Products use Capsaicin, a naturally occurring extract of peppers, which, when sprayed in a dog's face, causes only temporary, but extreme discomfort for the dog. Think of it as attitude re-adjustment. Halt! Stops dogs in their tracks, giving you time to move out of danger. Halt's pressurized spray is accurate up to 10 feet.

Introducing the Piston® Pro X LICENSE PLATE MOUNT. Simply remove the endcap, and attach the mount to achieve unparalleled visibility on the road. Upgrade your ride and hit the road with confidence and style. - For use with Piston® Pro X - Billet machined aluminum - Rotates for use in stowed or in-use position - Black Anodized

The Lizard Skins Patch Kits are made with high performance adhesive and will protect your frame from nicks and scratches. All patch kits come with 2 large, 4 medium and 2 small patches. - 14 mils thick for premium durability - UV resistant – won’t fade or discolor

Lizard Skins adhesive bike protection offers protection from nicks and scratches and is made with high performance adhesive. - 32mm wide x 222mm long - 3 extenders included for desired protection