Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Other
$24.99
FSA bearings that set directly into the frame without the use of pressed in cups.
- 36/45 degrees is Cane Creek-compatible
- 45/45 degrees is Campagnolo-compatible
$4.99 - $7.99
Power links provide tool free chain assembly.
- Chain Compatibility: SRAM
- Reusable: No
$69.00
Transfer Dropper Post Remote
A lightweight below-the-bar design for 1x drivetrains. FOX Transfer post levers provide smooth action and reduced force, providing consistent actuation pressure to raise or lower the seat.
- 22.2 1x Remote I-Spec EV
$12.95 - $13.95
- 10-speed: stainless steel 6.1mm wide no tool chain connector for Shimano and Campagnolo
- 9-speed: stainless steel 6.5mm wide no tool chain connector for Wippermann chains
- 6-8 speed: stainless steel 6.8mm wide no tool chain connector for Wippermann chains
$83.00
Internal components for servicing the Reverb and Reverb Stealth mechanism.
$20.00
Protect your downtube from scratches and damage with Salsa protectors.
$34.00
Our Post-Lock is a bicycle rack attachment point that can be positioned anywhere on your seatpost to provide a mounting point. Post-Locks do not have a lip like our Lip-Lock, Flip-Lock, and Rack-Lock so therefore cannot be used as a seatpost clamp.
- NOTE: This IS NOT a seat collar and CANNOT BE USED to keep your seatpost in place
- NOTE: NOT FOR USE with carbon fiber seatposts
- NOTE: Please consult your seatpost manufacturer to check compatibility
- Max torque 3–5Nm
- AL-6061 Aluminum
- Strong rack attachment points
- 34mm-wide rack mount threaded for M5 bolts
- Available for 27.2, 30.9, and 31.6 mm diameter seatposts
$29.99
Alternator Flat Mount is an adjustable dropout system designed to offer flawless functionality with flat-mount brakes installed. The dropout plates move back and forth on the frame, controlled with a captive barrel nut and screw for a minimal appearance.
- Compatible with frames designed for the Alternator Flat Mount standard
- Allows the rear axle to be adjusted through a 15mm range
- Thru-axle diameter = 12mm; thread pitch = 1.5
- Note: This part number only includes a single Alternator Flat Mount plate
- Uses Salsa 465 replaceable derailleur hanger (FS2322), sold separately. Also requires Salsa Axle Stud kit (FS1181)
- Hardware kits (sold separately) must always be paired with the style of dropout plates being installed on the frame
$12.00
Alternator Hardware Set for 2011–12 Ti frames and all 2013+ aluminum frames.
$30.00
Alternator 2.0 is the latest iteration of Salsa's adjustable dropout system. Alternator 2.0 Dropouts are a modular system consisting of replaceable dropout plates and fixing hardware. They are specifically designed for, and only compatible with, Salsa frames using the 2.0 system.
- Alternator 2.0 Dropout plates are compatible with frames featuring 142, 148, 177, or 197mm spacing
- Hardware kits (sold separately) must always be paired with the style of dropout plates being installed on the frame
- Allows for the rear axle location to be adjusted through a ~17mm range relative to the bottom bracket axle
- Note: This part number only includes a single Alternator 2.0 plate
$6.00 - $20.00
Chainstay protectors to guard your Salsa frame from scratches and damage.
$22.00
Lip-Locks don’t just secure your seatpost. They do it while looking good! Add a little functional bling to your ride. Available in a variety of sizes and color choices.
- Non-quick-release version of the Flip-Lock
- Stainless steel pivot and bolt
- Black, Silver, Blue, Green, Red, and Pink anodized with laser-etched logo
- Black = 28.6, 30.0, 30.6, 32.0, 35.0 and 36.4mm
- Silver, Blue, Green, Red, Gold, and Pink = 30.0, 30.6, 32.0 -and 35.0mm
- Orange, Purple, and Lime = 30.0, 32.0, and 35.0mm
- 34g
$30.00 - $50.00
Replacement swing plates for Alternator 1.0 dropouts.
$12.95
Replacement faceplates for Ritchey WCS C260 stems.
$18.95
Saddle Rail Clamp outer-pieces to adapt WCS Alloy 1-bolt posts to various saddle rail dimensions.
- To retrofit WCS 1-Bolt alloy seatpost
- Material: 7050 alloy
$13.95
Replacement faceplate for Ritchey WCS Trail stems.
$22.95
The iconic Ritchey logo is proudly emblazoned on these original 1-1/8" super-light glossy carbon headset spacers.
- UD Glossy Carbon
- White Ritchey logo
- 1-1/8"
- In the pack: (3x) 5mm + (3x) 10mm
$9.95
This top cap perfectly matches the graphics on all new Ritchey Comp stems for a clean, coordinated aesthetic. Compression bolt and plastic bolt cover are included.
- Material: alloy
- Includes top cap, bolt, and plastic cap
- Fits with 1-1/8" stems
- Weight: 8g
$10.00
- Lower cables for Odyssey's Gyro G3 (sold separately).
- Universal fit.
- Lower cables only.
$84.95
ReMote Sustain Lever
- Levers are Reverb Stealth series specific - A-series have no Rockshox marking below the head whereas B-series have gold Rockshox markings below the head
- Engineered break-away pivot that allows the lever to break away from the pivot in the event of a crash
- Cable Kind Clamp does not damage secured cables and features captive hardware
- Only compatible with Reverb Stealths
- Features a leak-proof, robust, and low-maintenance mechanical actuation system
- Easy cable detachment for service, travel or bike shipping
- 40mm reduction in in-frame height compared to Connectamajig Reverbs
$84.95
ReMote Sustain Lever
- Levers are Reverb Stealth series specific - A-series have no Rockshox marking below the head whereas B-series have gold Rockshox markings below the head
- Engineered break-away pivot that allows the lever to break away from the pivot in the event of a crash
- Cable Kind Clamp does not damage secured cables and features captive hardware
- Only compatible with Reverb Stealths
- Features a leak-proof, robust, and low-maintenance mechanical actuation system
- Easy cable detachment for service, travel or bike shipping
- 40mm reduction in in-frame height compared to Connectamajig Reverbs
$24.95
The precision-engineered Wolf Tooth Seatpost Clamp secures your seatpost and looks good doing it. At the heart of the Wolf Tooth Seatpost Clamp is a custom self-aligning bolt and anchor. The M5 bolt includes spherical washer and mates with a cylindrical anchor barrel. This means that threads are always perfectly aligned, preventing binding and ensuring consistent clamping force.
- M6 stainless steel bolt with integrated washer
- Tool interface - 4mm hex key
$9.99
• Shim available in various sizes
• For use with 25.4mm or 27.2mm seatposts
$9.00
Shimano XT RD-M786-GS Rear Derailleur Inner Cage Plate
- "B" fit for XTR RD-M986-GS, Deore RD-M615-GS, RD-M610-GS
- OEM inner cage plate for XT RD-M786-GS, SLX RD-M675-GS
$69.95
ReMote Dropper Levers provide clean actuation to adjust your post for preferred riding style, whether enduro, XC, downhill, or gravel.
- Lever pivots on a 21mm ball bearing for smooth operation
- Cable Kind Clamp does not damage secured cables and features captive hardware.
- Includes barrel adjuster for on the fly changes
- Engineered break-away pivot that allows the lever to break away from the pivot in the event of a crash.
$12.00
Hose fittings fit many of SRAM's newest hydraulic brake models.
- Fittings are backwards compatible with older SRAM and Avid hydraulic brakes
$8.00
- Replacement pins for 9-speed Shimano chains
- Compatible with CN-7700/HG92 chains
- 3 replacement pins per pack
$10.49
- Axle washers for use with 19mm bottom brackets
- 19.1x26x2.0mm
- Interface: 19mm
- Sold in a 10-pack