Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Other

$37.00
Need a hand-friendly quick-release with some major bling? Then Salsa's Flip-Lock Seat Clamps are just what you're waiting for! Regarded as some of the best out there by those in the know, these sweet seat collars are super tough, easy to use and come in a variety of colors to please your palette. - Machined 6061-AL with stainless steel pivot and bolt - Anodized with laser-etched logo - Integrated Flip-Off lever - 30.0 clamp for most Salsa steel frames - 30.6 clamp for most Salsa Scandium frames - For smooth operation, lightly grease the bolt threads and keep all parts clean
$20.00
Protect your downtube from scratches and damage with Salsa protectors.
$34.00
Our Post-Lock is a bicycle rack attachment point that can be positioned anywhere on your seatpost to provide a mounting point. Post-Locks do not have a lip like our Lip-Lock, Flip-Lock, and Rack-Lock so therefore cannot be used as a seatpost clamp. - NOTE: This IS NOT a seat collar and CANNOT BE USED to keep your seatpost in place - NOTE: NOT FOR USE with carbon fiber seatposts - NOTE: Please consult your seatpost manufacturer to check compatibility - Max torque 3–5Nm - AL-6061 Aluminum - Strong rack attachment points - 34mm-wide rack mount threaded for M5 bolts - Available for 27.2, 30.9, and 31.6 mm diameter seatposts
$29.99
Alternator Flat Mount is an adjustable dropout system designed to offer flawless functionality with flat-mount brakes installed. The dropout plates move back and forth on the frame, controlled with a captive barrel nut and screw for a minimal appearance. - Compatible with frames designed for the Alternator Flat Mount standard - Allows the rear axle to be adjusted through a 15mm range - Thru-axle diameter = 12mm; thread pitch = 1.5 - Note: This part number only includes a single Alternator Flat Mount plate - Uses Salsa 465 replaceable derailleur hanger (FS2322), sold separately. Also requires Salsa Axle Stud kit (FS1181) - Hardware kits (sold separately) must always be paired with the style of dropout plates being installed on the frame
$30.00
Replacement swing plates for Alternator 1.0 dropouts.
$12.00
Alternator Hardware Set for 2011–12 Ti frames and all 2013+ aluminum frames.
$30.00
Alternator 2.0 is the latest iteration of Salsa's adjustable dropout system. Alternator 2.0 Dropouts are a modular system consisting of replaceable dropout plates and fixing hardware. They are specifically designed for, and only compatible with, Salsa frames using the 2.0 system. - Alternator 2.0 Dropout plates are compatible with frames featuring 142, 148, 177, or 197mm spacing - Hardware kits (sold separately) must always be paired with the style of dropout plates being installed on the frame - Allows for the rear axle location to be adjusted through a ~17mm range relative to the bottom bracket axle - Note: This part number only includes a single Alternator 2.0 plate
$6.00 - $20.00
Chainstay protectors to guard your Salsa frame from scratches and damage.
$22.00
Lip-Locks don’t just secure your seatpost. They do it while looking good! Add a little functional bling to your ride. Available in a variety of sizes and color choices. - Non-quick-release version of the Flip-Lock - Stainless steel pivot and bolt - Black, Silver, Blue, Green, Red, and Pink anodized with laser-etched logo - Black = 28.6, 30.0, 30.6, 32.0, 35.0 and 36.4mm - Silver, Blue, Green, Red, Gold, and Pink = 30.0, 30.6, 32.0 -and 35.0mm - Orange, Purple, and Lime = 30.0, 32.0, and 35.0mm - 34g
$30.00 - $50.00
Replacement swing plates for Alternator 1.0 dropouts.
$5.99
Replacement hardware kit for Salsa Alternator Flat Mount dropouts. - For use only on frames designed for the Alternator Flat Mount standard
$20.00
Replacement derailleur hangers for Salsa frames. - Salsa Derailleur Hanger 1798
$100.00
Salsa Split Pivot Suspension Service Kits, for all 2014+ Horsethief, Pony Rustler, Spearfish, Redpoint and Deadwood Sus frames.
$30.00
Alternator 2.0 is the latest iteration of Salsa's adjustable dropout system. Alternator 2.0 Dropouts are a modular system consisting of replaceable dropout plates and fixing hardware. They are specifically designed for, and only compatible with, Salsa frames using the 2.0 system. - Alternator 2.0 Dropout plates are compatible with frames featuring 142, 148, 177, or 197mm spacing - Hardware kits (sold separately) must always be paired with the style of dropout plates being installed on the frame - Allows for the rear axle location to be adjusted through a ~17mm range relative to the bottom bracket axle - Note: This part number only includes a single Alternator 2.0 plate
$22.00
Lip-Locks secure your seatpost and add functional bling to your ride. - Non-quick release version of the Flip-Lock - Machined 6061-AL with stainless steel pivot and bolt - Anodized with laser-etched logo - For smooth operation, lightly grease the bolt threads
$35.00
Rack-Locks are one part form, two parts function. Sure, they still look great and do a great job of keeping your seatpost in place, but they also provide a mounting position for the front struts of a rack. - Max torque 3–5Nm - AL-6061 Aluminum - Strong rack attachment points - 34mm-wide rack mount threaded for M5 bolts - Stainless steel pivot and bolt - Available in 30.0, 32.0, 35.0, and 35.4 mm sizes - Black anodized with laser-etched logo - 45g for a 32.0mm collar
$10.00
- Open end allows use of bar ends, also while looking good - Compatible only with Salsa Backcountry Grips
$15.00
- Closed-end design protects end of handlebar while looking good - Compatible with Salsa Backcountry Grips only - 30g for pair
$30.00
Replacement swing plates for Alternator 1.0 dropouts.
$45.00
Front Derailleur Clamp: High Direct Mount
$20.00
Replacement derailleur hangers for Salsa frames.
$20.00
Replacement derailleur hangers for Salsa frames.
$4.99 - $5.99
Hardware is specifically designed for, and only compatible with, Salsa frames using the Alternator 2.0 dropout system. - For use on 2017 and newer alternator 2.0 Adjustable plates only - Please reference hardware kit FS2351 for fixed position plates - Please reference hardware kit FS2350 for adjustable plates
$13.99
Salsa's Split Pivot Dropout Tool might get you out of a jam, adding no weight to your equipment. This handy tool works as a headset top cap until you need it, and when combined with a 6mm hex wrench, turns into a socket for removing the Pivot Bolt to change your derailleur hanger - Lightweight aluminum bolt - For all Salsa Split Pivot suspension models - Integrated 22mm socket design interfaces axle nut to field-change the derailleur hanger - Operated via 6mm hex key found on most mini tools - Takes place of standard top cap - Eliminates the need to carry a 22mm wrench or socket in your pack - Lightweight, black anodized aluminum bolt included - 13g
$29.99
Alternator Flat Mount is an adjustable dropout system designed to offer flawless functionality with flat-mount brakes installed. The dropout plates move back and forth on the frame, controlled with a captive barrel nut and screw for a minimal appearance. - Compatible with frames designed for the Alternator Flat Mount standard - Allows the rear axle to be adjusted through a 15mm range - Thru-axle diameter = 12mm; thread pitch = 1.5 - Note: This part number only includes a single Alternator Flat Mount plate - Hardware kits (sold separately) must always be paired with the style of dropout plates being installed on the frame
$100.00
Salsa Pivot Service Kits
$20.00
Front Derailleur Mount for specific Salsa frame models. - Derailleur Mount Required for Direct Mount Front Derailleurs - Salsa Road Boost Front Derailleur Mount for 148 mm rear hub spacing - Enables installation of a braze-on front derailleur - Offset for 148 mm rear hub spacing - Replacement part for Cutthroat v2 frames - Wrap-around design provides additional derailleur stability - Interfaces with derailleur support bolt
$20.00
Replacement rear dropout Axle Stud Kit for Carbon V2 Beargrease, Warbird, and Warroad Frames. - Thread diameter and pitch: 12x1.5mm
$29.99
Alternator Flat Mount is an adjustable dropout system designed to offer flawless functionality with flat-mount brakes installed. The dropout plates move back and forth on the frame, controlled with a captive barrel nut and screw for a minimal appearance. - Compatible with frames designed for the Alternator Flat Mount standard - Accommodates a 12mm thru-axle - Allows the rear axle to be adjusted through a 15mm range - Note: This part number only includes a single Alternator Flat Mount plate - Hardware kits (sold separately) must always be paired with the style of dropout plates being installed on the frame
$5.00
Alternator 1.0 Set Screws
Page 1 of 2 Next page