Filter By:
Rigid
$350.00
The Whisky No.7 RD fork is a modern caliper road fork for road bikes with tapered steertubes. Their No.7 RD fork features a standard 9mm x 100mm QR axle. It offers low weight, precise handling, and clearance for 28c tires. This is a perfect upgrade fork for in lieu of a steel or alloy fork, and makes a great replacement fork for existing carbon product.
$435.00
When a fork isn’t designed well, you feel it from the minute you start your ride. That is why Whisky poured over every detail, pushed the limits, and broke new ground during the creation of the No.7 Carbon Disc Cyclocross Fork. It makes sure you don't have to worry about uncomfortable chatter or vibration while experiencing an astoundingly plush ride. They've accomplished this by using proven technologies like a delightfully stiff and compliant UD carbon fiber construction, not to mention the use of disc brake mounts on their CX forks. It all results in an enhanced riding experience and adds up to performance that you can count on.
- Axle to Crown Length: 392.2mm
- Brake Mount (Fork): Post Mount 140mm
- Front Axle: 10mm x 100mm
- Material: Carbon
- Maximum Tire Clearance (Fork): 48
- Offset: 47mm
- Rotor Size (Fork): 160mm
- S.H.I.S. Stem Clamp Diameter: 28.6
- Steerer Tube Length (mm): 300mm
- Wheel Size: 700c
$525.00
Whisky poured over every detail, pushed the limits and broke new ground during the creation of the No.9 Rigid Carbon Mountain Bike Fork. It eliminates uncomfortable chatter and vibration over rough sections for an astoundingly plush ride. The delightfully stiff and compliant UD carbon fiber construction, tapered steerer, and 15mm thru-axle ensure minimal weight and precise handling. It all results in an enhanced riding experience and adds up to performance that you can count on.
- Custom DT RWS Skewer included
- 3.0" max recommended tire size
- Axle to Crown Length: 480mm
- Brake Mount: IS Disc Brake 160mm
- Crown Race: 40
- Defined Color: Black
- Front Axle: 15 x 100mm
- Offset: 51mm
- S.H.I.S. Stem Clamp Diameter: 28.6
- Steerer Type: Tapered
- Weight: 750 grams
- Wheel Size: 29-inch
$525.00
The Whisky No.9 RD thru-axle fork is designed from the ground up to offer a modern road fork experience. Big tire clearance, flat mount brake capability, and internal cable routing all add up to a clean look and capable performance. Featuring sleek hidden fender mounts, this fork carries through with Whisky’s promise of refined, versatile performance.
- 1-1/4-inch Tapered steerer tube
- 12mm thru-axle, 100mm spacing
- Designed for flat mount disc brakes
- Hidden, removable fender mounts
- 700 x 30c max recommended tire size
- Includes thru axle and Whisky Parts Co. compression plug
$540.00
Whisky poured over every detail, pushed the limits, and broke new ground during the creation of the No.9 Fat Rigid Carbon Mountain Bike Fork. It eliminates uncomfortable chatter and vibration over rough terrain, so you experience an astoundingly plush ride with precise handling. They've accomplished this by using a delightfully stiff and compliant UD carbon fiber construction, a tapered steerer, and a 15 x 150mm thru-axle. It all results in an enhanced riding experience and adds up to performance that you can count on.
- Post style brake mount
- DT RWS Axle included
- UD full carbon construction
- Axle to Crown Length: 480mm
- Brake Mount: Post Mount 160mm
- Crown Race: 40
- Front Axle: 15 x 150mm
- Material: Carbon
- Offset: 51mm
- S.H.I.S. Stem Clamp Diameter: 28.6
- Steerer Type: 1-1/8 – 1-1/2-inch tapered
- Weight: 750 grams
- Wheel Size: 26-inch
$130.00
Our lugged and brazed Cross-Check fork has room for 700c x 45mm tires and fenders. It’s made from 4130 CroMoly steel and features fender eyelets at the dropouts, cantilever brake pivots, and now has through-leg mid-blade eyelets for mounting a rack. The eyelets are threaded 5 x 1mm and located 165mm up from the axle. Finish is powdercoat.
- Axle-to-crown: 400mm
- Offset: 44mm
- Steerer: 300mm
- Tire Clearance: 700c x 45mm
- Weight: 2.3 lb (1.0kg) uncut
$130.00
Surly's Steamroller Fork pairs great handling with urban utility. It has steep track geometry for lightening fast response, making it as at home on the velodrome as it is flying downtown with cars and pedestrians. It features a flat crown, drilled to accept a standard-reach caliper brake, and the use of wide 38mm tires. And its stealthy Black powdercoat means your opponents in the Pursuit race will never see you coming!
$130.00
The Troll Fork is just like the one that comes with the Troll frame, a 26-inch wheeled fully geared utility bruiser and cruiser. Like all Surly's forks, it's constructed of CroMoly steel. It sports removable rim brake pivots as well as a 51mm disc caliper mount. The Troll Fork is designed to accept a rack while using a disc brake, via through-blade threaded mounts in two places on each fork blade, and it's even got fender eyelets.
- Disc or rim brake compatible
- Compatible with disc brakes and rack simultaneously
- Fits 26-inch wheels with clearance for a 3.0-inch tire
- Steerer Type: Straight 1-1/8-inch
- Sleek powdercoat finish
$135.00
Classic 100% chromoly construction and engineered for modern accessories, that's Surly's Long Haul Trucker Disc Fork. Its beautiful curved blades are brazed to a lovely and tough investment-cast crown and dropouts. There are disc-brake mounts and eyelets for fenders and mounts for a standard or low-rider rack. Plus, it boasts a tough powdercoat finish that's tres chic.
- 100% CroMoly steel construction, curved blades, powdercoated
- Extensive mounting options with threaded eyelets in four locations: double eyelet dropouts, mid-blade, and a pair drilled into the fork crown
- 51mm IS disc brake mount
- 26" has clearance for a 2.1" tire
$135.00
Classic 100% chromoly construction and engineered for modern accessories, that's Surly's Long Haul Trucker Disc Fork. Its beautiful curved blades are brazed to a lovely and tough investment-cast crown and dropouts. There are disc-brake mounts and eyelets for fenders and mounts for a standard or low-rider rack. Plus, it boasts a tough powdercoat finish that's tres chic.
- 100% CroMoly steel construction, curved blades, powdercoated
- Extensive mounting options with threaded eyelets in four locations: double eyelet dropouts, mid-blade, and a pair drilled into the fork crown
- 51mm IS disc brake mount
- 700c has clearance for a 45mm tire
$135.00
The Straggler fork is very much like the Cross-Check fork — it's a lugged and brazed CroMoly fork with room for 700c tires up to 50mm wide. Both feature fender and rack mount eyelets at the dropouts, mid-blade threaded rack mounts and threaded eyelets on the sides of the crown for accessories. Both deliver a resilient ride and are finished in black powdercoat. The Straggler fork is equipped with a 51mm I.S. disc caliper mount and no accommodation for rim brakes.
- Axle-to-crown: 400mm
- Offset: 44mm
- Steerer: 300mm, 1-1/8" straight (42-58cm), 350mm, 1-1/8" straight (60-62cm)
- Tire Clearance: 50mm (w/o fender) Weight: 2.5 lb (1.15kg) uncut
$175.00
Like its QR cousin, the Disc Trucker Thru-Axle Fork is designed to mount racks and fenders and haul your worldly possessions. It's also got modern touches like dynamo routing, compatibility with flat-mount disc brakes, and three-pack mounts on both fork blades to satisfy your deepest cargo desires. Captured 12mm thru-axles make tool-free removal and installation possible. Offered in 26" and 700c wheel sizes, the Thru-Axle fork clears 26 x 2.1" or 700c x 47mm tires. With a 1-1/8" steerer, it's powder-coated and constructed using the same Chromoly steel as all our other frames and forks. Why? Because we swore a blood oath to steel and we intend to keep it.
Note: The Disc Trucker TA Fork is designed to pair best with second-generation Disc Trucker models—those first released in 2020. Defy this guidance at your own peril.
26 Inch
- Axle-to-crown: 376mm
- Offset: 45mm
- Steerer: 42–54cm frames = 300mm, 1-1/8" straight
- 56–62cm frames = 400mm, 1-1/8" straight
- Tire Clearance: 26 x 2.1" (with or without fenders)
700c
- Axle-to-crown: 390mm
- Offset: 45mm
- Steerer: 56–64cm frames = 350mm, 1-1/8" straight
- Tire Clearance: 700c x 47mm (with or without fenders)
$175.00
The Ice Cream Truck fork is made from 4130 CroMoly steel and is designed for Surly's Ice Cream Truck frame. It's ready for trail use and features butted and tapered blades with thru-axle dropouts spaced at 150mm. It has barrel bosses at the dropouts and crown, mid-blade thru-blade eyelets and triple bottle bosses on both fork legs. That's a lot of bosses. 51mm I.S. mounts use front disc spacing.
- Axle-to-crown: 483mm
- Offset: 47mm
- Steerer: 260mm, 1-1/8-inch straight
- Tire Clearance: 26 x 5.25-inch
$175.00
This beauty here was designed alongside Surly's Midnight Special frame. In an effort to shed a few grams (it's for a road bike after all), they opted to utilize a unicrown design rather than a lugged one. In addition to the weight savings, it also looks really nice — don't you think? Like the Midnight Special frame, this fork is equipped with modern road standards like flat mount disc brakes and a 12 x 100mm thru-axle. For increased versatility, it has braze-ons for fenders and racks (including mid-blade!).
- 100% CroMoly construction, fully brazed crown
- Mid-blade thru-blade eyelets
- Rack and fender eyelets at the dropout
- 12 x 100mm thru-axle
- Clearance for 27.5 x 2.32 or 700c x 42mm tires
$199.00
The Dinner Fork is non-suspension corrected and accommodates 26", 27.5", and 29" wheel sizes. If you want to run fenders alongside an 8 or 24-Pack style rack, this fork can do that. Hell, it relishes it. To give you even more options for carrying miscellaneous items, we put a set of 3-pack mounts on each fork blade, too.
Run it on your current Surly for a thought-provoking new experience, or throw it on a different rig to unlock some off-road capabilities. A truly versatile piece of cutlery, the Dinner Fork features 100% Surly Chromoly steel construction, 51mm IS disc brake mounts, and clearance for tires up to 26 x 3.0", 27.5 x 2.8", or 29 x 2.2".
Specifications:
- Axle-to-crown: 420mm
- Offset: 50mm
- Steerer: 350mm, 1-1/8" straight
- Tire Clearance: 26 x 3.0" (without fenders); 27.5 x 2.8" (with or without fenders); or 29 x 2.2" (without fenders)
- Weight: 2.75 lb.
$45.99
• Caliper brake mounts
• 35mm rake
• High-tensile steel construction
• 1-inch steerer diameter
• 165mm steerer length
• Threaded fork
• Compatible with 16-inch wheels
$45.99 - $49.99
• Caliper brake mounts
• 35mm rake
• High-tensile steel construction
• 1-inch steerer diameter
• 185mm steerer length
• Threaded fork
• Compatible with 20-inch wheels
$49.99
- Hi-tensile steel construction
- Caliper brake mount
- 35mm rake
- Axle-to-Crown: 365mm
- Race Diameter: 27mm
- Axle: 3/8-inch
- Thread Length: 120mm
- Steerer Length: 200mm
- Steerer Size: 1-inch
$49.99
- Hi-tensile steel construction
- Caliper brake mount
- 35mm rake
- Steerer Type: Threaded
- Steerer Size: 1-inch
- Steerer Length: 200mm
- Brake Mount: Caliper
- Axle-to-Crown: 395mm
- Race Diameter: 27mm
- Axle: 3/8-inch
- Thread Length: 100mm
$49.99
Economically priced hi-tensile steel MTB fork for 26-inch wheels.
- Steerer Type: Threaded Steerer
- Size: 1" (7/8 ID)
- Steerer Length: 198mm
- Rake: 45mm
- Axle-to-Crown: 393mm
- Race Diameter: 27mm
- Axle: 3/8"
- Thread Length: 95mm
$49.99
- Hi-tensile steel construction
- Caliper brake mount
- 35mm rake
- Steerer Type: Threaded
- Steerer Size: 1-inch
- Steerer Length: 137mm
- Brake Mount: Caliper
- Rake: 35mm
- Axle-to-Crown: 315mm
- Race Diameter: 27mm
- Axle: 3/8-inch
- Thread Length: 40mm
$59.99
- Hi-tensile steel construction
- Available with brake studs or without
- 60mm rake
- Type: Cruiser Size: 26"
- Steerer Type: Threaded Steerer
- Steerer Length: 250mm
- Axle-to-Crown: 400mm
- Axle: 3/8"
- Thread Length: 125mm
- O.L.D.: 100mm
$59.99
- Brake mounts: Caliper
- Construction: Hi-tensile steel
- Rake: 50mm
- Type: LW
- Steerer type: Threaded
- Race diameter: 27mm
- Axle: 3/8'inch
$59.99
• Cantilever brake mounts
• High-tensile steel construction
• Threaded fork
• Steerer diameter: 1-inch
• Steerer length: 180mm
$59.99 - $65.99
• Cantilever brake mounts
• High-tensile steel construction
• Threaded fork
• Steerer diameter: 1-inch
• Steerer length: 200mm
• For bikes with 26-inch wheels
$69.99 - $79.99
- Cantilever brake mounts
- 45mm rake
- Hi-tensile steel construction
- Steerer Type: Threaded
- Steerer Size: 1-inch
- Brake Mount: Cantilever
- Rake: 45mm
- Axle-to-Crown: 405mm
- Thread Length: 120mm
- Axle: QR 9mm
$69.99 - $79.99
• Cantilever brake mounts
• 45mm rake
• High-tensile steel construction
• Threaded fork
$79.99 - $89.99
• Caliper brake mounts
• 385mm axle-to-crown
• Chromoly construction
• 1-inch steerer diameter
• Threaded fork
$99.99
- Hi-Tensile steel construction
- 135mm fat tire front hub spacing
- Steerer Type: Threadless
- Steerer Size: 1-1/8-inch
- Steerer Length: 275mm
- Brake Mount: Is Disc
- Rake: 45mm
- Axle-to-Crown: 450mm
- Race Diameter: 30mm
- Axle: QR 9mm
$99.99
• Cantilever brake mounts
• 45mm rake
• Chromoly construction
• 1-inch steerer diameter
• 250mm steerer length
• Threaded fork
$103.99
• Chromoly construction
• V-brake mounts
• Fits bikes with 16-inch wheels
• Steerer length: 250mm
$109.99
• Cantilever brake mounts
• 45mm rake
• Chromoly construction
• 1-inch steerer diameter
• 200mm steerer length
• Threaded fork
$109.99
- Replacement urban threadless forks
- Accepts up to 40mm tire width
- Chromoly construction
- 1-1/8" steer tube
- Size: 700C
- Steerer Type: Threadless
- Steerer Length: 300mm
- Material: Chromoly
- Offset: 45mm
- Axle-to-Crown: 405mm
- Race Diameter: 30mm
- Axle: QR
$4.99
$10.00
50% Off
Keep the weight down and your headset snug with the Specialzied Carbon Steerer Tube Plug.
$209.00
Salsa Cro Moto Grande Fork 29".
- Disc only 29" rigid fork
- Suspension corrected for 80mm travel fork
- Maxle Included
- Axle to Crown Length: 483 mm
- Brake Mount (Fork): IS Disc Brake 160
- Crown Race: 40
- Front Axle: 15mm Thru x 100mm
- Material: Chromoly Steel
- Offset: 45 mm
- Wheel Mount Center Offset (mm): 0
- Steerer Tube Length (mm): 260 mm
- Weight: 1080 g
$569.00
The Kingpin Deluxe fork is perfect for fat bike expeditions, keeping you nimble even when fully loaded. Dual Three-Pack mounts on each leg let you attach water bottles or Anything Cages, and mid-blade mounts fit low rider racks for panniers. Or, ditch the gear and hit the trails with an ultra-light and responsive fork.
- High modulus carbon fiber construction
- Tapered 1-1/8" to 1-1/2" steerer tube
- 160 minimum rotor size; 203mm maximum rotor size
- Dual sets of Three-Pack mounts on each fork leg for Anything Cages or water bottles
- Mid-blade mounts for low rider racks
- Internal routing for 150mm spaced dynamo hubs
- Maximum Tire / Rim sizes: 26 x 5", 27.5 x 4.0", 29 x 3.0"
- 150 x 15 mm thru axle included
- Front Axle Size: 15 x 198L, TP=1.5, TL=9
$599.00
The Firestarter Carbon Fork is Salsa's high-end, rigid bikepacking fork. This sure-tracking platform features a carbon structure and 15mm thru-axle design, and the Three-Pack mounts on the forward portion of each leg allow use of Salsa Anything Cages or extra water bottle cages.
- Axle to Crown Length: 483 mm
- Brake Mount (Fork): Post Mount 160
- Crown Race: 40
- Front Axle: 15mm Thru x 100mm
- Wheel Mount Center Offset (mm): 0
- S.H.I.S. Stem Clamp Diameter: 28.6
- Steerer Type: Tapered
- Steerer Tube Length (mm): 260 mm
- Weight: 620 g
- Wheel Size: 29er, 29+, 700c
- Rotor Size (Fork): 200
- Maximum Tire Clearance (Fork): 3
$599.00
The Firestarter carbon fork is made from high-modulus carbon fiber, built for all-terrain riding. Three-Pack mounts on each leg give you room for water or Anything Cages, and mid-blade mounts accommodate racks for panniers. This fork is light, tough, and ultra-versatile with the capacity to fit a wide range of tire sizes.
- High modulus carbon fiber construction
- Tapered 1-1/8" to 1-1/2" steerer tube
- 160mm minimum rotor size; 180mm maximum rotor size
- Mid-blade mounts for low rider racks
- Compatible with wheel sizes: 27.5+, 29", 29+, 700c
- Dual sets of Three-Pack mounts on each fork leg for Anything Cages or water bottles
- BOOST 110 x 15mm thru axle included
- Front Axle Size: 15 x 135L, TP=1.5, TL=10
- Internal routing for 110 BOOST dynamo hubs
$329.95
With vibration-muting carbon blades, and alloy steerer and crown, the Comp carbon/alloy cross and road fork is ideal for cyclocross pursuits or road riding.
- Material: carbon blades / alloy steerer, crown, and dropouts
- 1-1/8" straight steerer
- Steerer length: 300mm
- Axle-crown: 391mm
- Rake/Offset: 48mm
- Crown diameter: 45mm (1-1/8")
- Spacing: 57mm
- Minimum tire clearance: 6mm
- Wheel compatibility: 700c
- Fender mounts
$579.95
Ritchey's history with cyclocross runs long and deep, sort of like the mud sections of your favorite 'cross course. The WCS Carbon Cross Disc Fork is designed from the ground up to manage the unique stresses a disc brake demands – including a carbon layup that resists twisting under hard braking. Decades of experience between the course tape, and building the bikes and components designed to win, inform the performance and design details of this fork. It employs a monocoque construction, it's compatible with standard and integrated headsets, and features carbon dropouts and disc mount.
- Blade: Carbon
- Crown: Carbon
- Steerer: Carbon
- Steerer Length: 300mm
- Steerer Diameter: Tapered 1-1/8 – 1.5-inch
- Rake: 45mm
- Blade Shape: Curved
- Drop out: Carbon
- Rotor size: 140mm (160 w/ adapter)
- Crown Diameter: 45mm
- Integrated 45-degree crown race
- Axle-to-Crown: 395mm
- Finish: Matte UD carbon
- Weight: 440g (w/ uncut steerer)
- Compression plug included
$619.95
With nearly 50 years of designing and building bicycles and components dedicated to adventures that go beyond limits or expectations, Tom created the new Ritchey WCS Adventure Fork for those of us that are unbound by the constraints of riding-surface type, seemingly insurmountable distances, or what you can carry on your bike.
The new one-piece carbon monocoque WCS Adventure Fork with a tapered steerer has been meticulously engineered and painstakingly built to perform with razor-sharp accuracy, deliver a high level of comfort, and offer practical features for all manner of cycling adventures. Built with High Modulus Fiber (HMF), this impeccable adventure fork offers superior strength while also reducing road chatter fatigue on those endless days and nights in the saddle. Smooth internal fiber flow in the crown/steerer area delivers the best force transfer from the crown to the shaft and offers increased impact strength for those potholes you didn’t see.
With your desire to ride far and long in any condition or under any circumstance, the WCS Adventure Fork features rack mounts for packs full of gear and a fender mount to keep the grime off you and your bike. Three multi-purpose mounts on the legs give you more places to stow the necessities you gather at the last cafe.
Welcoming flat-mount disc brake calipers, the WCS Adventure Fork also fits up to 52mm tires (700c) or 2.4” tires (650b) - depending on tire make and model – making this fork the ultimate addition to any rig assembled for the purpose of seeking, discovering and enjoying adventure.
$119.99
From the pavement to the gravel, Origin-8's Cromo-Lite Disc Road Fork is made to explore. Crafted from super tough 4130 cromoly, it provides a comfortable ride with room for 28c tires for added control. And, it features mounts for disc or caliper brakes so you can ride your way.
$209.99
Upgrade your road rig with Origin-8's Cromo-Lite II Road fork. It features full cromoly construction for a sublimely smooth ride.
$279.99
Upgrade your road rig with Origin-8's Synergy Fork. It features an 4130 chromoly-steel steerer with oversize, carbon fiber legs to soak up road chatter. With a striking 3K weave finish, the Synergy fork looks as nice as it rides.
$144.99
Odyssey's 41-Thermal forks quickly established a reputation for strength and quality when originally introduced in 1999, and they have since gone on to change the standards that all forks are judged by.
Features:
- Fully redesigned
- Laboratory tested and team proven
- New, custom, seamless, tapered, butted and specially formed leg tube shaping for improved grind and guard clearance
- All-new steerer tube design improves fatigue strength and includes a built-in, integrated, lower headset seat race
- New, optimized, 4mm dropout shape for grind and peg clearance
- Updated 7075-T6 pre-load bolt, US Pat. No. 7,591,474
- Proven 41-Thermal processed 4130 chromoly
- Legendary lifetime replacement warranty
Specs:
- 25mm steep offset
- 3/8-inch axle slots only
- 990 brake mounts
- Starting at 2lb 2oz (912 grams)
$144.99
Odyssey's 41-Thermal forks quickly established a reputation for strength and quality when they originally introduced them in 1999, and they have since gone on to change the standards that all forks are judged by. Their new R-Series forks continue this tradition.
FEATURES
- Fully redesigned.
- Laboratory tested and team proven.
- New, custom, seamless, tapered, butted and specially formed leg tube shaping for improved grind and guard clearance.
- All-new steerer tube design improves fatigue strength and includes a built-in, integrated, lower headset seat race.
- New, optimized, 4mm dropout shape for grind and peg clearance.
- Updated 7075-T6 pre-load bolt
- Proven 41-Thermal processed 4130 chromoly
- Legendary lifetime replacement warranty
SPECS
- 32mm traditional offset
- 3/8” axle slots only Starting at 1lb 15.2oz (885 grams)
$174.99
Odyssey's 41-Thermal forks quickly established a reputation for strength and quality when they originally introduced them in 1999, and they have since gone on to change the standards that all forks are judged by. The new R-Series forks continue this tradition.
FEATURES
- Fully redesigned.
- Laboratory tested and team proven.
- New, custom, seamless, tapered, butted and specially formed leg tube shaping for improved grind and guard clearance.
- All-new steerer tube design improves fatigue strength and includes a built-in, integrated, lower headset seat race.
- New, optimized, 4mm dropout shape for grind and peg clearance.
- Updated 7075-T6 pre-load bolt
- Proven 41-Thermal® processed 4130 chromoly
- Legendary lifetime replacement warranty
SPECS
- 25mm traditional offset
- 3/8” axle slots only Starting at 1lb 15.2oz (885 grams)
$59.99 - $89.99
700c Hybrid fork with Cantilever Mounts
- Forged dropouts with eyelets, straight-gauge oval-tapered blades
- Dimension Forks are intended for general recreational riding only; they are not intended for aggressive riding, stunt riding or road racing
- Welded unicrown construction
- Clearance for 50mm wide fenders (1 1/8-inch)
- Axle to Crown Length: 403mm (1 1/8-inch); 412mm (1 1/8-inch SC); 403mm (1-inch)
- Brake Mount (Fork): Canti Studs
- Color: Black
- Crown Race: 30 (1 1/8-inch, 1 1/8-inch SC); 26 (1-inch)
- Front Axle: 10mm x 100mm
- Material: Steel
- Offset: 50 mm
- S.H.I.S. Stem Clamp Diameter: 28.6 (1 1/8-inch, 1 1/8-inch SC); 25.4 (1-inch)
- Steerer Tube Length: 300mm (1 1/8-inch); 260mm (1 1/8-inch SC); 300mm (1-inch)
- Steerer Type: Straight
- Weight: 975g (1 1/8-inch); 1105g (1 1/8-inch SC); 963g (1-inch)
- Wheel Size: 700c
$450.00
ENVE's Road Fork is the fork by which all others are judged, built for road cyclists looking for the optimal balance of weight, strength, and stiffness.
When everyone was turning away from the fork aftermarket, we focused our efforts on creating the best aftermarket fork we could. By following our mantra of functional simplicity, we developed a manufacturing process that allows the fibers in an ENVE fork to run continuously from the top of the steerer to the bottom of the drop-outs. The ENVE forks feature a hollow one-piece design free of bonding or drilling, and the brake bolt hole is molded into the crown, allowing for additional weight savings and strength. You can literally put an ENVE fork on a bike within minutes of it leaving the mold. While this manner of construction is novel, the real win is that the majority of artisan frame builders and customers choose ENVE as their fork of choice due to its confident on-road performance and handling characteristics.
$89.99
- Forged dropouts with eyelets, straight-gauge oval tapered blades
- Dimension Forks are intended for general recreational riding only; they are not intended for aggressive riding, stunt riding or road racing
- 85mm threaded section
- Fits up to 30c tires
- Axle to Crown Length: 382 mm
- Brake Mount (Fork): Long Reach Caliper (55mm - 73mm)
- Crown Race: 27
- Front Axle: 9mm x 100mm
- Material: Steel
- Offset: 50mm
- S.H.I.S. Stem Clamp Diameter: 25.4-24tpi Quill
- Steerer Type: Straight
- Weight: 839g, 876g, 907g
- Wheel Size: 27"
$144.99
Made from revised 100% Cult Classic tubing for increased strength and then 100% post-weld heat treated. 1-pc machined steerer tube with an integrated bearing race, tapered legs, and plenty of tire clearance.
$144.99
Made from revised 100% Cult Classic tubing for increased strength and then 100% post-weld heat treated. Investment cast 1pc drop outs for maximum strength and a super sleek finish. Features an updated top cap retention design.
- 1-pc machined steerer tube with an integrated bearing race
- Tapered legs
- Tire clearance for 2.40” tires
- Updated top cap retention design
$149.99
- Chromoly steel BMX style forks
- Perfect replacement for modern BMX-inspired wheelie bikes
- Steerer Type: Threadless
- Steerer Size: 1-1/8-inch
- Material: Chromoly
- Race Diameter: 30mm
- Axle: 3/8-inch
$329.99
All Box One forks are engineered and crafted using our Oversized Technology. These forks are the single most crucial component in the quest for bike control. We’ve moved carbon from areas of low stress to areas that handle high loads. Those muscular shoulders aren’t just for looks, as they are integral to achieving superior steering stiffness. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency.
Key differences: This particular model fork is tailored for mid-sized racers and includes a lighter weight 1 inch 7000 series aluminum steerer tube and 10mm cold-forged dropouts.
Weight Limit: 45 kg (99 lbs) or less with limitations as per Category 1 of EN 16054:2012 Standard
FEATURES
- 7075-T6 Aluminum Standard 1” Steerer Tube to Accommodate Mid-Sized Racers
- Designed for 10mm Axle Conventional Hubs
- Internal Butterfly for Added Durability at Steerer Tube and Fork Crown Interface
IMPORTANT NOTES
- Includes Box One™ Stem Lock
- Note: Use of a star nut voids the warranty for this product.
COMPATIBILITY
- Box One Stem Spacers
- Box Two Stem Spacers
- Box Two Threadless Headset
- Box Two 1" Integrated Headset
- Box Two 1" Integrated Conversion Headset
- Box Two Headset Adapters
- Box Two Top Load 1" Stem
- Box Hex Lab 1" Stem
- Box Two Center Clamp 1" Stem
$329.99
All Box One forks are engineered and crafted using our Oversized Technology. These forks are the single most important component in the quest for bike control. We’ve moved carbon from areas of low stress to areas that handle high load. Those muscular shoulders aren’t just for looks as they are integral to achieving superior steering stiffness. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency.
Key differences: This particular model fork is tailored for larger-sized racers and therefore includes a lightweight 1-1/8 inch 7000 series aluminum steerer tube and 10mm cold-forged dropouts.
Weight Limit: 115kg (253 lbs) with limitations as per Category 2 of EN 16054:2012 Standard
FEATURES
- 1-1/8 Inch 7000 Series Aluminum Steerer Tube
- Standard Size Fork for Larger-Sized Racers
- Internal Butterfly Steerer Tube and Fork Crown Interface
- 10mm Standard Dropouts
- Cold-Forged and Bonded Dropouts
COMPATIBILITY
- Box Two 1.1/8" Integrated Headset
- Box One Carbon 45x45 1.1/8" Integrated Headset
- Box Two Threadless Headset
- Box Two Headset Spacers
- Box One Front Load Stem
- Box One Top Load Stem
- Box Two Front Load Stem
- Box Two Top Load Stem
- Box One Delta Stem
- Box One Center Clamp Stem
- Box Two Center Clamp Stem
SPECIFICATIONS
- 20 Inch 24 Inch
- Material High Modulus Unidirectional Carbon Fiber Construction
- Steerer Material 7000 Series Aluminum
- Finish High Gloss Black
- Offset 32mm
- Steerer Tube 1-1/8 Inch
- Weight
- 20": 560g / 19.75oz
- 24": 585g / 20.7oz
$329.99
All Box One forks are engineered and crafted using our Oversized Technology. These forks are the single most crucial component in the quest for bike control. We’ve moved carbon from areas of low stress to areas that handle high load. Those muscular shoulders aren’t just for looks, as they are integral to achieving superior steering stiffness. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency.
Key differences: This particular model fork is tailored for smaller racers and includes a lighter weight 1 inch 7000 series aluminum steerer tube and 10mm cold-forged dropouts.
FEATURES
- Overall Reduced Size for Smaller Racers
- 1 Inch 7000 Series Aluminum Steerer Tube
- Internal Butterfly Steerer Tube and Fork Crown Interface
- 10mm Standard Dropouts
- Cold-Forged and Bolded Dropouts
COMPATIBILITY
- Box One Stem Spacers
- Box Two Stem Spacers
- Box Two Threadless Headset
- Box Two 1" Integrated Headset
- Box Two 1" Integrated Conversion Headset
- Box Two Headset Adapters
- Box Two Top Load 1" Stem
- Box Hex Lab 1" Stem
- Box Two Center Clamp 1" Stem
SPECIFICATIONS
- 20 Inch
- Material High Modulus Unidirectional Carbon Fiber Construction
- Steerer Material 7000 Series Aluminum
- Finish High Gloss Black
- Offset 32mm
- Steerer Tube 1 Inch
- Weight 397g/14.0oz
$349.99
All Box One forks are engineered and crafted using our Oversized Technology. These forks are the most important component in the quest for bike control. We’ve moved carbon from areas of low stress to areas that handle high loads. Those muscular shoulders aren’t just for looks as they are integral to achieving superior steering stiffness. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency.
Key differences: This particular model fork is tailored for larger-sized racers. It also takes our application of Oversized Technology one step further as it includes a tougher 1-1/8 inch chromoly steerer tube and stiffer 20mm through-axle cold-forged dropouts.
Weight Limit: 115kg (253 lbs) with limitations per Category 2 of EN 16054:2012 Standard.
FEATURES
- Oversized Technology™
- Chromoly Steel Steerer Tube to Accommodate Larger-Sized Racers
- 20mm Through Axle to Increase Responsiveness
- Internal Butterfly for Added Durability at Steerer Tube and Fork Crown Interface
Page 1 of 1