Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Model Years
- Show Fewer Model Years
Brakes/Levers/Pads

$0.99 - $32.99
$19.99 - $32.99
Up to 95% Off
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

$1.99
- MC bodies are bare (no guts, reservoir, lever, etc.)
- Stroker Series bodies come with bar clamp and bolts

$2.99
Origin-8's Alloy Braze-on Inserts convert hydraulic pass-throughs to cable stops so you can run full length housing. Designed for frames with pass through braze ons and sold in a bag of 10.

$6.95 - $9.99
Replacement inserts for Shimano cartridge v-brake pads
- Black: standard compound designed for dry condition riding
- Red: semi-aggressive compound for good performance
- Salmon: aggressive compound for extreme weather conditions
- Green: designed for ceramic coated rims
- Dual: combination of Salmon and Black compounds for more controlled, smoother stopping
$7.95 - $11.25
The Dura Type insert pad was originally developed as an aftermarket upgrade for high end Shimano brake systems. The Kool-Stop Dura pads are the same spec as Shimano pads and fit Shimano, SRAM, TRP and Tektro holders with a set screw.
Compounds:
- Black: Kool-Stop's standard compound which is great for all weather conditions, but designed for dry condition riding.
- Ceramic: This compound was designed for ceramic coated rims and is great in all weather conditions.
- Salmon: Kool-Stop's most famous Salmon compound is also one of the most aggressive compounds for extreme all weather conditions especially in the wet, but still superb in the dry.
- Carbon: Kool-Stop's original carbon compound which works great for most carbon wheels but will wear quicker on fast steep descents.
- Dual: A fusion of Kool-Stop's two finest compounds which will give superb braking in all weather conditions. This combination produces a more controlled smooth stop!
Features:
- Patented Plow Tip
- Water Grooves
- Rim Friendly Compounds
- Fits 55mm length holders

$8.00 - $29.99
- T100 Sintered Metallic: long-life, all-condition compound
- T106 Semi Metallic: no-bed, shorter-life, quieter compound
- Set includes one pair of pads with retention clip

$8.50
The Slim by Four brake pads feature a symmetric shape designed for both forwards and backwards braking.
- Custom inner frame helps to stiffen the pad, reducing braking power loss from flex

$9.99
Compatible with cantilever brakes, Jagwire's Mountain Sport Brake Pads boast Jagwire's tried-and-true all-weather compound for excellent speed control, stopping power and durability.

$9.99
• Compatible with most cantilever and u-brake systems
• Allen head type
• All weather compound

$11.99
Shimano Replacement pads for Mountain brake shoe.
- Shimano Cartridge-type mountain brake pads fit models: XTR BR-M970, BR-M960, BR-M951, BR-M950 XT BR-T780, BR-M770, BR-M760, BR-M750, BR-M739, BR-M737 LX BR-T670, BR-M580, BR-M570 Deore BR-M530, BR-M510 Alivio BR-M430, BR-MC18 Acera BR-M422, BR-M421, BR-M420, BR-M330, BR-T300 DXR BR-MX70 MX BR-M600
- M70R Ceramic: For use with ceramic side-wall rims only

$12.99
Bolt on Avid's 20R Brake Pads for consistent, powerful braking. They're designed for use with linear-pull brakes.

$12.99
Jagwire Sport Organic pads feature an all-new resin compound. Mounted on a steel backing plate, this compound gives good power and modulation, while keeping noise to a minimum. Great for riders primarily riding in dry conditions.

$14.99
SRAM's Pad Inserts are the perfect upgrade for your brakes to deliver excellent stopping power and speed modulation. The secret is SwissStop's proprietary compound that resists heat buildup for a consistent grip without being "grabby." They have deep grooves to whisk away water so they're perfect for road and cyclocross alike.
$17.00 - $18.25
Kool-Stop disc pads are made with organic materials that are blended and bound together using a resin. The compounds do include small amounts of metal to improve the braking formula but though this is a mined material the pads are largely organic. The term semi-metallic can also be used. Kool-Stop has found during testing that their disc pads are Rotor Friendly and provide high performance braking throughout the life of the pad.
- Qty 1 = enough for 1 wheel

$17.99 - $29.99
These disc brake pads fit a variety of SRAM and Avid brakes and offer industry leading brake compounds for consistent, confident performance.
- Low noise, high performance semi-metallic compound lasts longer than resin
- Steel backing plate

$17.99
These disc brake pads fit a variety of SRAM and Avid brakes and offer industry leading brake compounds for consistent, confident performance.
- Low noise, high performance semi-metallic compound lasts longer than resin
- Steel backing plate
- Compatible with SRAM Code RSC (A1), Code R (B1), Guide RE; Avid Code (2011-2016)

$18.99
•Designed for cantilever & caliper brakes
•22.2mm (7/8") clamp
•Forged alloy construction
•4 finger
•205g pair

$19.99
- T100 Sintered Metallic: long-life, all-condition compound
- T106 Semi Metallic: no-bed, shorter-life, quieter compound
- Set includes one pair of pads with retention clip

$19.99
Make sure you have enough brake for where and how you ride. A larger rotor does a better job of displacing heat generated from braking and can provide better modulation. Origin-8's Torq-Lite Disc Adapter allows you to increase your braking power by giving you the option of upgrading from 160mm rotor to 180 or 203mm.
• Used to upgrade the disc size on post mount calipers
• Lightweight aluminum design

$20.00 - $24.99
• 107mm arch for better clearance with mud guard
• Updated rubber boots secure attachment to lead pipe
• Strong braking power with excellent braking control
• Cartridge shoe holder
• Color options: Black, Silver

$20.00
Shimano Altus BR-CT91 cantilever brakes offer confident and reliable braking at a convenient price point.
- Brake Lever Actuation: Short Pull
- Brake Mount Type: Canti Studs
- Material: Aluminum
- Pad Attachment Style: Threaded Post
- Weight: 204g

$21.99
Origin-8 Classic Linear-Pull Brakes are a great upgrade or replacement brake for your ride. Available in both front and rear, they feature forged aluminum construction with dual hex screw tension adjustment for simple set-up.

$23.00 - $53.00
Avid's Front 180mm/Rear 160mm Post Bracket Hardware Kithas everything you need to mount a front 180mm or a rear 160mm rotor (sold separately) to your bike.

$25.00 - $29.00
SRAM road disc brake pads are designed for use with SRAM road hydraulic disc brakes (HRD).
- For use with Level Ultimate & Level TLM Brakes
- Pad Material: Organic
- Type: Road/CX
- Includes guide pin, clip, & pad spreader

$25.00 - $32.00
SRAM's Disc Brake Pads are reliable and rugged. These pads are compatible with Avid Trail and SRAM Guide and G2 disc brakes.

$26.99
Jagwire's Mountain Sport Disc Brake Pads (Magura) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability.

$27.99 - $33.99
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

$29.99
Pro Extreme Sintered pads feature an aggressive compound that provides maximum stopping power making it perfect for DH riding. The dense, sintered compound also resists water making it extremely effective in wet conditions.
- Compatible with Shimano R9170, Metrea U5000, Ultegra R8070, and Road RS305, RS405, RS505 and RS805
- Compatible with Rever MCX1 Flat-Mount and MCX2 Flat-Mount
Page 1 of 3
Next page