Brakes/Levers/Pads

- Replacement barrel adjuster for FR5 and SD7 levers - Includes one pair

Attach your IS Mount disc brake brackets with premium SRAM mounting bolts. These bolts are made from stainless steel for a lifetime of use and come with thread-locking compound already applied.

Slip Avid's Rim Wrangler 2 Brake Pad Inserts into your Rim Wrangler 2 cartridges (sold separately) for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze. They're designed for use with linear-pull brakes.

Bolt on Avid's 20R Brake Pads for consistent, powerful braking. They're designed for use with linear-pull brakes.

Avid makes it easy to get a perfectly set up brake with their innovative CPS Hardware Kit. Each kit features a series of washers that make it easy to set up your brake. Step 1: Install the bolts and washers loosely so the caliper can move. Step 2: Squeeze the brake lever. Step 3: Tighten the bolts. It's that simple to get a rub-free setup! This kit includes stainless steel hardware with washers and bolts for both CPS (Caliper Positioning System) mounting and standard (direct-mount)mounting.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Avid's Front 180mm/Rear 160mm Post Bracket Hardware Kithas everything you need to mount a front 180mm or a rear 160mm rotor (sold separately) to your bike.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Avid's Front 170mm Post Bracket Hardware Kit has everything you need to mount a 170mm rotor (sold separately) to the front of your bike. Kits include mounting bolts and post mount spacers for front brake installation.

Avid's Rear 170mm Post Bracket Hardware Kit has everything you need to mount a 170mm rotor (sold separately) to the back of your bike. Kits include mounting bolts and a 30mm post mount spacer for rear brake installation.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Need a replacement line for your Avid hydraulic disc brakes? You're covered with Avid's Hydraulic Line Kit. It's got 2000mm of hose for front or rear application, and all the fittings to work with your brakes.

Clean up your control center with Avid's Matchmaker clamp. It combines the mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can drop some grams and keep your bar nice and tidy.

Clean up your handlebar with Avid's MatchMaker X clamp. It combines mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can shed grams and keep your bars nice and tidy. You can also integrate RockShox's XLoc remote (sold separately) for maximum convenience and ease of use.

Bring the power and performance of disc brakes to your drop bar bike. - Road-specific. - Mechanical simplicity.

Cost effective stopping power from the leader in cable-actuated disc brakes. - All calipers have 74mm mounting bolt spacing - For use with with long cable-pull levers - Mono-block caliper design has outboard pad adjustment - Spring tension is adjustable - Includes steel-backed organic pads - Brake Caliper Type: Post Mount - Brake Lever Actuation: Long Pull - Rotor Included: No - Weight: 215 g

With gobs of beautifully modulated power and intuitive easy-to-use adjustability, the BB7s set the standard in the realm of mechanical disc brakes. Inboard and outboard adjustor knobs, Tri-Align Caliper Positioning System, and integrated cable stop spring tension adjustment ensures that our standard is everyone else's goal. - Mechanical simplicity - Adjustability

Smooth, powerful braking performance that's simple to set up and easy to adjust. Bad weather or rough roads? Not even a factor with BB7's reliable mechanical performance. Compatible RED, Force, Rival and Apex levers. - Road-specific - Mechanical simplicity - Adjustability

Clean up your handlebar with Avid's MatchMaker X clamp. It combines mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can shed grams and keep your bars nice and tidy. You can also integrate RockShox's XLoc remote for maximum convenience and ease of use.

Power, control and strikingly good looks. That's the story with the all-new BB7S Mountain mechanical disc brakes from Avid. This update on the well-established BB7 Mountain includes new stainless steel hardware and sleek black anodizing that makes them look as fast as you'll feel. Part of the beauty with the BB7S Mountain is the no-brainer performance. You get smooth, modulated power and control plus user-friendly setup and adjustability. And the lightweight rotors keep the weight in check so the performance boost applies to climbs as well as descents. - Stainless steel hardware - Compatible with linear pull brake levers

A sleek and stylish upgrade to the best mechanical caliper on the market. The BB7S stainless steel hardware and anodized finish make it right at home on any road-disc build. Compatible with RED, Force, Rival and Apex levers. - Black anodized finish - Stainless steel hardware

This race-ready mechanical disc brake takes the proven power and performance of BB7 and dials it up a few notches with its sleek "Falcon Grey" anodizing and weight-saving hardware. So you'll be just as confident on the climbs as you are on the descents. Compatible with RED, Force, Rival, and Apex levers. - Lightweight - Titanium hardware

With a stiff, one-piece, co-molded design, Box Three™ Air Flow Brake Shoes provide the excellent stopping power and are the perfect choice for your next build. They include two-tone, dual-compound pads that feature a unique finned design that helps improve airflow. Pivoting posts aid installation and make toe-in adjustments simple and easy.

Box One 70mm Brake Shoes feature a stiff, cold-forged, and CNC-machined cartridge body and triple-compound, 70-millimeter pads for superior braking. Mounting posts that pivot allow for perfect pad alignment, while silver machined accents and laser-etched graphics offer refined aesthetics. - 70-millimeter replacement pads - Pivoting posts - Triple Compound - silver machined accents

The Box Three Disc Brake Rotor is a Stainless Steel, 6 bolt rotor designed for BMX Race. Utilizing a small size and rounded outside edges for safety is the optimal size for any BMX Race bike. FEATURES: - ISO 6 bolt brake/hub interface - Rounded outside edges - Lightweight Cutouts - High quality stainless steel rotor - High quality locking steel T-25 rotor bolts included

- Cold forged, CNC-machined cartridge body with self-aligning pivoting posts - Triple-compound 70mm pads

Box Three V-Point Brake Levers are the most versatile levers in the entire Box family. Available in either short or long reach versions, Box Three Levers are reversible, allowing users to 'flip' the lever for use on either side of the handlebar. Other features include reaching adjustment for accurate positioning and a barrel adjuster to fine-tune cable tension.

Box Three V-Point Brake Levers are the most versatile levers in the entire Box family. Available in either short or long reach versions, Box Three Levers are reversible, allowing users to 'flip' the lever for use on either side of the handlebar. Other features include reaching adjustment for accurate positioning and a barrel adjuster to fine-tune cable tension.

Box One 70mm Carbon Brake Pads were formulated with a special compound compatible with carbon fiber rims. This helps keep the heat down while still creating high-performance stopping power. Paired with our Box One Brake Pad Cartridge Body so you can pull them out of the bike and put them right on the bike! Sold as a pair. Features: - High Performance - Stopping Power Specs: - Material: 6061-T6 Aluminum - Weight: 55 grams

DESCRIPTION The Box Three Brake is available in 85mm with short reach lever or 108mm with long reach lever. They include two-tone, dual-compound pads that feature a unique finned design that helps improve airflow. The Philips head tension screws aid installation and makes toe-in adjustments simple and easy. FEATURES - Cold Forged from 6061-T6 Aluminum - Up to 35mm of brake pad adjustment - Box Three™ Air Flow Brake Shoes w/ Dual Compound Pads - Brass bushings, Stainless Steel Hardware - Phillips head tension screw - 5mn allen key to secure cable on right arm